Correction & polishing polish

The choice of polish depends on the condition of the paint. For deep scratches and pronounced defects, a compound (strong abrasive polish) is necessary. For micro-scratches and light swirl marks, a medium polish is sufficient. For a final polishing, an ultra-fine finishing polish gives a mirror shine. Some polishes are “diminishing abrasives”: their particles break down during the work and automatically move from the correction stage to the finishing stage. For motorcycles, use the same polish, but with a smaller pad, suited to smaller surfaces. AGM Vision offers polishes for every level of correction.

Yes, polishing products are identical: car and motorcycle paint use the same types of clear coats. The difference lies in the application method. Motorcycle surfaces are smaller and curved (tank, fairings, fenders), which requires a 75 mm pad or working by hand. Watch out for unpainted parts: the polish must not touch raw plastics, seals, or carbon surfaces. Protect these areas with masking tape. For motorcycle rims, use a specific metal polish if they are in polished aluminum. AGM Vision offers compact pads suited to motorcycles.

Yes, polish is abrasive and removes a thin layer of clear coat with each pass. That is its operating principle: it levels scratches by leveling the surrounding surface. A compound removes about 1 to 3 microns per pass, a medium polish 0.5 to 1 micron. An automotive clear coat averages 40 to 60 microns in thickness, which leaves a comfortable margin for several corrections. A paint thickness gauge allows you to check the remaining thickness. AGM Vision recommends not exceeding 2 to 3 complete corrections over the lifetime of a vehicle.

It is highly recommended for an optimal result. Polishing corrects surface defects (scratches, swirl marks, oxidation) and creates a perfectly smooth surface. Applying a wax or a coating on unpolished paint amounts to locking in the defects under the protection. The ideal order is: washing and decontamination, compound if necessary, finishing polish, IPA wipe-down, then application of the protection. If the paint is already in good condition (no visible scratches), a simple light polish before protection is enough. AGM Vision offers all-in-one correction + protection kits.

Yes, polish is applied by hand with a foam or microfiber applicator pad. Put a small dab of product, then rub in circular motions, with moderate pressure. Hand polishing corrects light defects (micro-scratches, light oxidation), but does not have the power of a polisher for deep scratches. The work is also longer and more tiring.For a first experience, applying by hand allows you to understand the product before investing in a machine. AGM Vision recommends the polisher for a professional result, but also offers polishes that are easy to work by hand.