Polish DA COARSE RUPES (250ML)
Polish DA Coarse (250 ml) hard abrasive for removing the most difficult imperfections
Instructions for use:
Work on a cold surface. Shake well. Always work section by section, 40cm x 40cm at a time.
Orbital machine application:
- Apply 4-5 drops to the desired pad.
- Lightly spray the pad with Chemical Guys pad conditioner.
- Spread the polish over the bodywork at speed setting 1 to distribute the product.
- Set the orbital machine speed parameter to 5-6. Using moderate pressure, work the area in 2-3 passes until the polish becomes clear. Finish with light pressure.
- Remove residue with a clean microfiber cloth.
- Finish with DA FINE polish for perfect clarity.
Rotary machine application:
- Apply 4-5 drops to the desired pad.
- Lightly spray the pad with Chemical Guys pad conditioner.
- Set the machine between 1,000 and 1,500 rpm to distribute the product.
- Work 40cm x 40cm at a time. Using only the weight of the machine (without pressure), work the area in 3-4 passes until polished.
- For the final pass, adjust the speed between 1,200 and 1,800 rpm. Work until optimal clarity is achieved.
- Remove residue with a clean microfiber cloth.
- Finish with DA FINE polish for perfect clarity.