Rimpaca Ultimate Chemical Guys wheel brushes, set of 3
Set of 3 Rimpaca Ultimate Chemical Guys wheel brushes, with ultra-soft, non-abrasive synthetic wool heads. Three sizes to clean brake dust, the inside of the wheel, brake calipers and grilles, without scratching finishes.
Rimpaca Ultimate Chemical Guys wheel brushes: reach every corner of the rim
The Chemical Guys Rimpaca Ultimate wheel brushes form a set of three brushes designed for washing wheels and hard-to-reach areas of the car. Their appeal lies in the material of the heads: an ultra-soft and very voluminous synthetic wool, which lifts dirt without attacking the finish. This set is aimed at anyone who wants to wash their rims thoroughly without taking the risk of marking them with a brush that is too stiff.
Non-abrasive synthetic wool heads
The heads are made of ultra-soft and particularly dense synthetic wool. They are designed not to scratch any finishes, including rims, brakes and grilles. The flexibility of the fibers allows them to conform to contours rather than slide over them, which helps dislodge grime lodged in corners.
Three sizes for three different areas
The set brings together three brush sizes, each intended for an area that the others reach poorly:
- the largest for the inside of the rim barrel, where brake dust and splashes accumulate
- the intermediate size to get between tight spokes and clean the visible face
- the smallest for narrow areas, such as around brake calipers and grilles
Ergonomic handles
Each brush is equipped with a durable handle with an ergonomic profile. The grip remains comfortable even when the brush is loaded with product, which reduces hand fatigue and offers better control of the motion during washing.
Compatible finishes
Chemical Guys indicates these brushes as suitable for stainless steel, metal and aluminum surfaces. They are therefore suitable for aluminum rims, as well as for metal and stainless elements of the bodywork and wheel arches. Manufacturer reference ACC617.
Instructions for use of Rimpaca Ultimate Chemical Guys wheel brushes
The Rimpaca Ultimate brushes are always used in addition to a wheel cleaner, never dry on a surface still loaded with gravel. The method recommended by Chemical Guys comes down to four simple steps.
Cleaning a dirty wheel
- Rinse the wheel with clean water to remove non-adhering dirt and abrasive particles.
- Spray your wheel cleaner on the visible face and inside the barrel, for example the Diablo gel wheel cleaner.
- Scrub with the brush suited to the area, focusing on the inside of the barrel, in the recesses and between the spokes.
- Rinse thoroughly with water once the dirt has been loosened by the product.
Choosing the right brush
- Use the large brush for the inside of the wheel and deep areas.
- Switch to the intermediate size for close spokes and the face of the wheel.
- Finish with the small brush around the brake calipers and on the grilles.
Good to know
Rinse the brushes after each wheel so you don’t carry brake dust from one wheel to another, then let them dry head down. Once the wheels are clean and dry, a protection such as the Wheel Guard wheel wax will make subsequent washes easier. Avoid, however, using them dry on a wheel still covered with gravel, because it is these particles, and not the brush, that scratch the finish.