APC to Dilute - FullCarX

It perfectly cleans interiors and exteriors, sanitizes the treated surfaces by eliminating all dust or dirt and leaves the space aseptic and deodorized.

Depending on the area to be treated, the dilution will vary, since APC is not ready to be applied: it is ultra-concentrated and requires dilution with water.

EXTERIOR USE:

1. Dilute the APC cleaner in the following proportions:
2. For bodywork: at 10%, that is, dilute 100 ml of cleaner in one litre of water.
3. For tires: at 20%, that is, dilute 200 ml of cleaner in one litre of water.
4. Spray directly onto the surface to be treated.
5. Spread the product with a microfiber cloth.
6. Rinse thoroughly with water.

INTERIOR USE:

1. Dilute the APC cleaner at 5% (50 ml of cleaner in 1 litre of water).
2. Spray directly onto the surface to be treated.
3. Spread the product with a microfiber cloth.
4. Rinse thoroughly with water.

ENGINE USE:

1. Dilute the APC cleaner at 25% (250 ml of cleaner in 1 litre of water).
2. Spray directly onto the surface to be treated.
3. Let it act for 30 to 60 seconds.
4. Spread the product with a microfiber cloth.
5. Remove residue with a dry cloth.

UPHOLSTERY USE:

1. Dilute the APC cleaner at 10-25% (100 to 250 ml of cleaner in 1 litre of water).
2. Spray directly onto the surface to be treated.
3. Let it act for 20 to 30 seconds.
4. Scrub the upholstery with a soft brush to remove stains and embedded dirt.
5. Dry with a microfiber cloth.