Quick Detailer liquid wax FullCarX 750 ml

Quick Detailer FullCarX liquid wax is applied to a clean, dry bodywork to seal the clear coat and revive the shine. Its protective film limits dust adhesion. In a 750 ml bottle.

FullCarX Quick Detailer liquid wax: shine and protection between two washes
The Quick Detailer FullCarX liquid wax is a finishing product that is applied in a few minutes on a clean, dry bodywork. It lays down a light coating that revives the gloss of the clear coat, seals it, and protects it. It is aimed at motorists who want to regain a clean look between two full washes, without committing to a polishing session.
What the Quick Detailer liquid wax does
- Gloss : it increases the gloss of the clear coat as soon as it is applied.
- Protection : it seals the paint under a light film.
- Feel : it leaves a smooth and soft surface.
- Dirt : dust and grime adhere less and slide over the deposited film.
Which surfaces to apply it on
FullCarX intends the Quick Detailer for bodywork and windows. It complements a standard wash by going over the clear-coated and glass surfaces of the same vehicle, without changing tools: two clean microfiber cloths are enough.
A weekly maintenance product
The gloss obtained lasts about a week, according to FullCarX, which recommends renewing the application each week to keep the vehicle in condition. This is the rhythm of a maintenance product, to be distinguished from a long-lasting treatment, such as a ceramic spray.
Who it is for
The Quick Detailer is suitable for the individual who washes their car regularly and wants a quick finish, as well as for the detailing professional who is looking for a touch-up product before handover or exhibition. Its dry application, without rinsing, limits the necessary equipment to two microfiber cloths.
Capacity
AGM Vision offers the Quick Detailer FullCarX liquid wax in a 750 ml bottle. The product is applied in small quantities with each pass, section by section.
Instructions for use of Quick Detailer FullCarX liquid wax
FullCarX is applied dry, on bodywork that has already been washed. The product is worked section by section, with very little product and two clean microfiber cloths: one to spread, one to remove the excess.
Application on the bodywork
- Wash then dry the entire bodywork before applying the product.
- Apply a small amount of Quick Detailer directly onto the surface.
- Spread with the microfiber until the product is fully absorbed.
- Remove the excess with a second clean microfiber to achieve maximum shine.
- Move on to the next section and repeat the operation panel by panel.
Application on windows
- Make sure the glass is clean and dry.
- Apply the same small amount of product and spread it with the microfiber.
- Buff with a dry microfiber until the haze disappears.
Regular maintenance
- Renew the application each week to maintain the shine.
- Carry out a complete wash as soon as the bodywork is truly dirty: the liquid wax is applied to an already clean surface.
Good to know
- Always work section by section and with little product: this is what prevents streaks and holograms.
- Use clean microfiber cloths so you don’t bring particles back onto the clear coat.
- The shine obtained lasts about one week before a new application.
- HydroInterior Ceramic Interior Spray Chemical Guys
- Liquid ceramic wax Ceramic Wax FullCarX
- Ceramic waterless wash HydroGlide Chemical Guys
- Liquid carnauba wax FullCarX
- Ceramic wax Crystal Wax FullCarX
- Solid carnauba wax FullCarX
- Hydro Coat FullCarX ceramic spray
- Borderless microfiber Chemical Guys
- HydroSpin Chemical Guys ceramic wheel spray
- HydroShield Ceramic Spray Chemical Guys
- HydroLeather Leather Ceramic Spray Chemical Guys
- Activate Shine and Seal Sealant Chemical Guys