Carnauba wax shampoo Wash and Wax FullCarX 750 ml
Concentrated car shampoo enriched with carnauba wax, it lifts dirt from the bodywork and leaves a hydrophobic film that repels water. Its formula cleans and protects in a single pass, in a 750 ml bottle.
Carnauba wax shampoo Wash and Wax FullCarX: wash and protect in a single step
The Wash and Wax FullCarX carnauba wax shampoo is a concentrated car shampoo that cleans the bodywork and lays down a layer of wax in a single pass. It is aimed at motorists who want to maintain their vehicle without following up a wash with the application of a separate wax.
A shampoo and a wax in the same product
The formula combines cleaning agents with perfectly emulsified carnauba wax. The wash lifts the dirt accumulated on the clear coat, while the wax remains on the surface after rinsing and drying. The bodywork comes out clean and protected against external agents, with no additional step.
What carnauba wax brings
- Hydrophobic effect : water beads on the clear coat and drains away faster.
- Glossy and smooth finish to the touch, once the bodywork is dry.
- Protection against external agents that settle on the paint between two washes.
An economical concentrate to use
Wash and Wax is always used diluted: 2 to 3 capfuls are enough for 5 liters of water in a bucket. The 750 ml bottle therefore covers a large number of washes, and the cost per pass remains low compared with a ready-to-use shampoo.
For which vehicles
The product is designed for automotive bodywork and is used in the same way on a van, a motorcycle, or a motorhome. On clear-coated paint, it is the routine maintenance wash. On a vehicle already treated, it takes over between two protection applications.
Available sizes
FullCarX offers Wash and Wax in 750 ml, 5 L, and 25 L. AGM Vision offers the 750 ml format here, sized for regular private use. For a touchless pre-wash upstream, it can be combined with the Cherry Foam FullCarX active foam.
Instructions for use of the carnauba wax shampoo Wash and Wax FullCarX
Wash and Wax is always used diluted in water. Two methods are possible depending on the equipment you have, with the bucket wash remaining the most suitable for this shampoo.
Bucket and mitt wash
- Rinse the bodywork with clean water to remove heavy dirt.
- Pour 2 to 3 capfuls of Wash and Wax into 5 liters of water.
- Agitate the solution to generate foam.
- Wash panel by panel with a microfiber wash mitt, using gentle, straight movements.
- Rinse thoroughly with clean water.
- Dry with a drying microfiber.
Foamer application
- Prepare the solution at a ratio of 1 to 5, i.e., 100 ml of shampoo for 0.5 L of water.
- Spray over the entire bodywork.
- Go over again with the wash mitt, then rinse and dry as above.
Good to know
Carnauba wax flakes limit the density of the foam obtained with the foamer: the manufacturer therefore recommends bucket and mitt washing to get the best out of the product. As with any car shampoo, work in the shade on cool bodywork and never let the solution dry on the paint before rinsing. Rinse the mitt regularly in a bucket of clean water so as not to bring abrasive particles back onto the clear coat.