What is the Hydro Coat FullCarX ceramic spray?

Hydro Coat is a hydrophobic ceramic protectant that is applied to a wet bodywork, just after rinsing the wash. Its formula, with a high silicon content, deposits a sealing layer that makes water bead on the paint, windows and rims.

What is the difference between a ceramic spray and a car wax?

Wax leaves a greasy film that adds depth, but wears off quickly, whereas a ceramic spray forms a harder, clearly more hydrophobic siliceous layer. Hydro Coat is applied to a wet surface at the end of washing, while a traditional wax requires dry bodywork and polishing time. To compare the approaches, also see the Hydro Charge Chemical Guys ceramic spray.

Does Hydro Coat replace a professional ceramic coating treatment?

No, a ceramic coating applied in a workshop lasts several years and requires decontamination, then a complete polishing of the paint. Hydro Coat is a maintenance protection announced up to two months, which is renewed in a few minutes during a wash, without equipment or a booth.

On which surfaces can Hydro Coat be used?

FullCarX validates the entire exterior of the vehicle, including the bodywork, windows, mirrors and rims. Always work area by area rather than on the whole car, and keep a consistent chain by washing beforehand with a Hydro Suds Ceramic Chemical Guys shampoo.

How long does Hydro Coat protection last?

FullCarX announces a durability lasting up to two months and advises renewing the application every two months. The actual duration depends on exposure to bad weather, outdoor parking, and the frequency of washes.

Should you rinse and dry the car after applying Hydro Coat?

Yes, the product is sprayed for 30 to 60 seconds per area on a wet bodywork, then rinsed with pressurized water before complete drying with a microfiber. This drying promotes sealing and prevents streaks. An XXL FullCarX drying towel allows you to dry an entire car quickly.

Hydro Coat FullCarX ceramic spray 750 ml

Name: Hydro Coat FullCarX ceramic spray
Brand: FullCarX
SKU: 1704
Price: 9.17 EUR
Availability: InStock

Reference: HYD-CO-FULLCX

Hydro Coat is a 750 ml ceramic spray that is applied to a wet bodywork, just after rinsing. It forms a hydrophobic layer that makes water bead and protects the bodywork, windows and rims for up to 2 months.

€9 17

Learn more

Free shipping from €45

Quantity

In stock

Payment by secure transaction

Sold and shipped by AGM Vision 🇫🇷

Tested quality and reliability! This product has been tested in our garage in Excideuil (24) and we use it frequently for our customers.

FullCarX Hydro Coat ceramic spray: hydrophobic protection at the end of washing

FullCarX Hydro Coat is an instant hydrophobic ceramic protectant that is sprayed onto bodywork that is still wet, just after rinsing the wash. It is aimed at motorists who want real surface protection without lengthy preparation or a trip to a workshop: the product is applied, rinsed and dried as part of the usual wash, in a few minutes.

What the product brings to the paint

The high-silicon formula lays down a sealing layer on the clear coat. Water no longer spreads over the surface: it beads and slides off, which speeds up drying, limits limescale marks and makes dirt less likely to stick during the next wash. The effect is visible from the first rinse, with no curing time or buffing.

Key points

Application on a wet surface, directly after rinsing, with no prior wiping
Immediate hydrophobic effect, with no curing time
Claimed durability up to 2 months by FullCarX, with renewal recommended every two months
Compatible with the entire exterior: bodywork, windows, mirrors and wheels
750 ml bottle, also available in 5 L and 25 L formats from the manufacturer

For which uses

Hydro Coat fits into routine maintenance, between two more durable protections, or as the only protective layer on a vehicle washed regularly. It is suitable for both home washing and high-pressure station washing, since the final rinse is part of the protocol. On windows, it helps water run off while driving; on wheels, it makes brake dust deposits easier to remove.

What it does not replace

A professional ceramic coating applied in a booth, after decontamination and polishing, lasts several years and plays in a different league. Hydro Coat is a maintenance protection: it is renewed often, but it is applied without any particular skill and without immobilizing the vehicle. It also does not correct micro-scratches, which require polishing.

Instructions for use of the Hydro Coat FullCarX ceramic spray

Hydro Coat is used at the end of the wash, on a wet bodywork free of any shampoo residue. The protocol below summarizes the application instructions provided by FullCarX.

Application after a classic wash

Wash the vehicle normally, with shampoo and a wash mitt.
Rinse thoroughly until there is no shampoo residue left on the bodywork.
On the bodywork still wet, spray the product zone by zone, for 30 to 60 seconds maximum per zone.
Rinse the treated area with pressurized water before moving on to the next.
Dry the entire vehicle with a microfiber towel: this drying promotes sealing and reinforces the hydrophobic effect.

Windows, mirrors and rims

Treat these elements in the same sequence as the bodywork, on a wet surface.
Spray, rinse, then dry with microfiber without letting the product evaporate in place.
Repeat the operation about every two months to maintain protection.

Precautions

Never apply on hot bodywork or in direct sunlight: the product would dry too quickly.
Work in sections and not on the entire car, to avoid any drying before rinsing.
If marks appear anyway, they can be removed with a medium-cut polish or a liquid wax.