What is a polishing pad conditioner used for?

It lubricates the pad to prevent it from heating up and the polish from drying too quickly. Result: more consistent work, fewer passes needed, and a greatly reduced risk of burning the clear coat.

Is the Pad Conditioner essential?

It is not mandatory, but it clearly improves the consistency of polishing, especially with water-based polishes such as V32, V36 and V38, as well as on large surfaces where the pad has time to dry.

Which pads can the Pad Conditioner be used on?

On all pads: foam, microfiber and wool, with a dual action polisher as well as a rotary. It also works with any compound or polish, whatever the brand.

How to prime a polishing pad?

Apply 4 to 6 drops of polish to the clean, dry pad, then spray 1 to 3 pumps of Pad Conditioner directly onto its surface. Spread at a slow speed before starting to work the area.

Why does my pad heat up during polishing?

A dry pad creates friction: the abrasives dry before the end of the pass, which produces marring and, in the worst case, a burned clear coat. One to three sprays per 40 x 40 cm area are enough to eliminate this phenomenon.

Does the Pad Conditioner extend the lifespan of the pads?

Yes. By eliminating dry friction, it reduces foam wear and limits clogging by compound residue. Still, clean the pad every two or three sections to maintain its effectiveness.

CHEMICAL GUYS PAD CONDITIONER LUBRICANT

Name: CHEMICAL GUYS PAD CONDITIONER LUBRICANT
Brand: Chemical Guys
SKU: 512
Price: 16.63 EUR
Availability: InStock

Reference: PPCON-CHG

Priming spray that lubricates foam, microfiber or wool polishing pads. It limits heat and dust, extends the working time of the polish and prolongs the life of the pads.

€16 63

View delivery rates

Quantity

In stock

Secure payment

Your payment details are entered on our bank's or PayPal's website, never on ours.

Sold and shipped by AGM Vision 🇫🇷

Tested quality and reliability! This product has been tested in our garage in Excideuil (24) and we use it frequently for our customers.

Pad Conditioner Chemical Guys: the spray that primes your polishing pads

The Polishing Pad Conditioner from Chemical Guys is a spray lubricant that primes the pad before polishing. A few sprays are enough to moisten the foam, open its cells, and distribute the polish evenly over the entire working surface.

Why do you need to prime a pad?

A dry pad creates friction and heat. This heat dries the abrasives before the end of the pass, which produces uneven work, marring, unnecessary extra passes and, in the worst case, burned clear coat. By lubricating the pad, the Pad Conditioner:

extends the working time of the polish and makes it possible to use all of its abrasives;
significantly reduces heat and the risk of burning the clear coat;
limits dust and compound residue;
reduces the number of passes needed;
extends the life of pads, which wear out less quickly.

Compatible with all pads and all polishes

The Pad Conditioner works on foam, microfiber and wool pads, regardless of the machine — dual action (DA) or rotary polisher — and regardless of the product used. It is particularly useful with water-based polishes, such as the Chemical Guys V line: V32 Extreme, V36 Medium and V38 Finish.

Pad Conditioner User Manual

Attach your pad, clean and dry, to the polisher backing plate.
Apply 4 to 6 drops of polish to the pad.
Spray 1 to 3 sprays of Pad Conditioner directly onto the face of the pad.
Spread the product over the area at low speed before starting the work.
Add a spray as soon as the pad seems dry to you or the product starts to grab.

On a new pad, an additional spray during the first use helps to properly saturate it. Clean the pad every two or three areas in order to maintain its effectiveness.