Active pink mousse Cherry Foam FullCarX 750 ml
Cherry Foam is a concentrated pre-wash foam, with neutral pH and a cherry fragrance, that loosens dirt from the bodywork before manual washing. This 750 ml bottle can be used with a foam cannon as well as with a bucket.
Active pink foam Cherry Foam FullCarX: touchless pre-wash
FullCarX Cherry Foam is a concentrated pre-wash foam, pink in color and cherry-scented, that you spray onto the bodywork before any contact with the wash mitt. It is aimed at careful private individuals as well as detailers who want to remove the bulk of the dirt before hand washing and thus limit micro-scratches.
What a pre-wash foam is used for
Pre-washing is the first step of a careful car wash. The foam is applied to the bodywork: it coats the grime and lifts it from the paint, then it is rinsed off, carrying away the film of dirt. The mitt only comes in afterward, on a surface already cleared of most abrasive particles.
The strengths of Cherry Foam
- Super concentrated formula : it dilutes heavily, which makes the 750 ml bottle economical to use.
- Dense and lubricating foam : FullCarX claims high cleaning power and a foam that limits the formation of micro-scratches.
- Neutral pH : the manufacturer indicates a formula that is safe for all types of surfaces, including painted bodywork.
- Biodegradable formula : mentioned by FullCarX on the product’s official sheet.
- Pink color and cherry scent : the product’s coverage remains very easy to see on the bodywork.
Two application methods
Cherry Foam can be used with a foam cannon connected to a pressure washer, with a foam sprayer, but also with a bucket and mitt for a classic wash. This versatility avoids having to buy two separate products: one for pre-wash and one for washing.
Available sizes
FullCarX offers Cherry Foam in a 750 ml bottle, a 5 L canister, and a 25 L professional format. The 750 ml corresponds to regular private use, on one or two vehicles.
Instructions for use of the pink active foam Cherry Foam FullCarX
FullCarX indicates two dilutions depending on the equipment used. In both cases, work in the shade, on bodywork that is not scorching hot, and always rinse thoroughly with clean water.
With a foam cannon or a sprayer
- Rinse the bodywork with clean water to remove the coarsest dust.
- Fill the tank with a 1:5 dilution, i.e. 100 ml of Cherry Foam for 0.5 L of water.
- Start with the tires and rims, then spray the foam over the entire bodywork.
- Leave to act for 2 to 3 minutes, without letting the product dry.
- Rinse thoroughly from top to bottom, then dry with a microfiber.
With a bucket and a mitt
- Pour 2 to 3 capfuls of Cherry Foam into a bucket of 5 liters of water.
- Work up a lather, then wash with the mitt, working from top to bottom.
- Rinse with clean water until the product has completely disappeared.
- Dry the bodywork with a microfiber or a chamois leather.
Precautions
Never let the product dry on the bodywork: rinse before it sets. Avoid direct sunlight and hot surfaces, which speed up drying. A preliminary rinse of the vehicle removes dust that could scratch the paint during washing.