Honeydew Snow Foam Chemical Guys pre-wash shampoo 473 ml
Honeydew Snow Foam is the Chemical Guys pre-wash shampoo that produces a thick, clinging foam to loosen dirt before washing with a mitt. Its pH-neutral formula is safe for waxes, sealants, and ceramic protections. It is offered in a 473 ml bottle.
Honeydew Snow Foam Chemical Guys pre-wash shampoo: loosen dirt before contact
The Honeydew Snow Foam from Chemical Guys is a pre-wash shampoo designed to be sprayed with a foam cannon before washing with a mitt. It coats the bodywork in a layer of thick foam that softens and lifts dirt, in order to limit mechanical friction responsible for micro-scratches. It is aimed at motorists who wash their vehicle themselves and are looking for a safer method for the paint.
What the pre-wash foam does
The formula combines surfactants and polymers that generate abundant, clinging foam. By staying in place on vertical surfaces, it gives the cleaning agents time to act on road dust, traffic residue, and pollution marks before the wash mitt is used.
Compatible with your protections
- pH-neutral formula that does not attack waxes, sealants, or ceramic coatings.
- Can be used on all exterior surfaces: paint, glass, plastics, rubber, stainless steel, metal, and aluminum.
- Clean rinse, with no residual soapy film.
- Signature melon fragrance from the Chemical Guys range.
Three ways to use it
- With a foam cannon mounted on a pressure washer, for the densest foam layer.
- With a foam gun connected to a garden hose, when you don’t have high pressure.
- In a classic wash bucket, as a diluted shampoo for mitt washing.
For which vehicles
Cars, SUVs, vans, motorcycles, or motorhomes: the product is suitable for any vehicle whose exterior is washed with water. It fits into routine maintenance as well as preparation before polishing or before applying a protection, a step where the surface must be perfectly clean. If you prefer a more classic bucket wash, the Citrus Wash and Gloss shampoo from the same range meets the same need.
Packaging: 473 ml bottle.
Instructions for use of Honeydew Snow Foam Chemical Guys
The dosages below are those indicated by Chemical Guys. Shake the bottle before each use and work in the shade, on a cool bodywork, to prevent the product from drying on the surface.
With a foam cannon or foam gun
- First rinse the vehicle with clean water to remove the coarsest particles.
- Pour 30 to 90 ml of Honeydew Snow Foam into the cannon’s approximately 1-liter reservoir.
- Top up with warm water, then stir gently.
- Spray the foam from bottom to top over the entire bodywork.
- Let it sit for a few minutes, without ever letting it dry.
- Rinse from top to bottom, then wash with a mitt if dirt remains.
In a bucket, as a wash shampoo
- Add 30 to 90 ml of product to a bucket of approximately 19 liters of water.
- Wash panel by panel with a wash mitt, from top to bottom.
- Rinse thoroughly with clean water.
- Dry with a drying microfiber to avoid limescale marks.
Precautions
- Do not apply in direct sunlight or on hot sheet metal.
- Never let the foam dry on paint or glass.
- Keep the bottle closed, protected from freezing, and out of reach of children.
- The manufacturer reports the presence of 1,4-dioxane, a substance covered by California Proposition 65. Avoid prolonged contact with skin and rinse thoroughly with water in case of splashes in the eyes.