pH neutral shampoo Super Foam FullCarX 1 L
Super Foam FullCarX is a pH-neutral, ultra-concentrated car shampoo that generates a dense, lubricating foam thanks to its micro-waxes. This 1 L bottle cleans the bodywork, windows, rims and plastics, while limiting the risk of micro-scratches.
Super Foam FullCarX pH-neutral shampoo: a dense foam for safe washing
Super Foam FullCarX is a pH-neutral car shampoo, designed for washing the bodywork with a foam cannon as well as with a bucket. Its ultra-concentrated formula is aimed at detailing professionals as well as individuals looking for effective cleaning, without attacking the vehicle’s surfaces.
An active foam that encapsulates dirt
Its high content of surfactants generates a dense and abundant foam that envelops dirt and lifts it from the surface. The dwell time does part of the work even before the mitt is used, which reduces mechanical friction on the clear coat.
Micro-waxes for lubrication
Super Foam contains micro-waxes that lubricate the surface during washing. This glide limits the risk of micro-scratches, the main drawback of a wash carried out without preparation or sufficient lubrication.
A neutral pH for regular maintenance
The neutral pH makes it possible to clean without the risk of damaging treated surfaces. It is therefore suitable for frequent use, whereas acidic or alkaline formulas remain reserved for occasional operations, such as decontamination or degreasing.
All vehicle surfaces
- Bodywork and paint
- Windows and windshield
- Wheels and wheel arches
- Exterior plastics
The FCX GOLD professional range
Super Foam belongs to FullCarX’s FCX GOLD range, developed with high-performance components and stated to be 100% active matter. This concentration explains the high dilution ratios indicated by the brand, as well as the yield of a 1 L bottle, which covers many washes depending on the method chosen.
Two possible washing methods
The product can be used both with a foam lance or a foamer and with a simple bucket and a wash mitt. This versatility makes it a shampoo suitable for weekly maintenance washing as well as for a more thorough cleaning, before a protection phase.
User manual for Super Foam FullCarX
Super Foam is always used diluted. In both methods below, the surface must be wet before application and the product must never dry on the bodywork.
With a foam lance or a foamer
- Wet the entire vehicle with clean water.
- Dilute Super Foam at a ratio of 1:5 to 1:10 depending on the level of soiling.
- Spray the foam onto the bodywork and let it act for 1 to 2 minutes.
- Wash with a microfiber wash mitt without letting the product dry.
- Rinse thoroughly with clean water.
- Dry with a drying microfiber.
With a bucket and a mitt
- Pour 1 to 4 capfuls, i.e. 200 ml maximum, into 3 to 5 liters of water.
- Wet the vehicle, apply the solution, then let it act for 1 to 2 minutes.
- Wash panel by panel, from top to bottom, without letting it dry.
- Rinse thoroughly, then dry with the microfiber.
Good to know
A foam cannon connected to a pressure washer makes it possible to cover the entire vehicle with foam and reduce mechanical contact during washing. If the bodywork is hot, work section by section and rinse quickly to follow the brand's instruction, which asks to never let the product dry.