Foaming shampoo Beer Scent Snow Foam Chemical Guys 473 ml
Beer Scent Snow Foam is a Chemical Guys pre-wash foam, pH-balanced and with a beer scent, that loosens road grime before hand washing. Its formula respects waxes and protections already in place. 473 ml bottle.
Beer Scent Snow Foam Shampoo Chemical Guys: the foaming pre-wash with a beer fragrance
The Beer Scent Snow Foam from Chemical Guys is a limited-edition pre-wash foam, designed for detailers who want to lift off the bulk of the dirt before putting the wash mitt on the bodywork. Its pH-balanced formula produces a thick foam with a beer scent, with notes of hops, brewed wheat, honey, and lager.
What a pre-wash foam is for
Pre-washing sets up everything that follows in the wash. Sprayed with a foam cannon, the foam coats the bodywork, softens road grime, and carries it away during rinsing. The mitt then encounters far fewer abrasive particles, which limits micro-scratches and marring in the clear coat.
What the formula brings
- pH balanced: the product does not attack waxes, sealants, or ceramic coatings already in place.
- Dense foam: it clings to vertical panels long enough to work, instead of running off right away.
- Dual use: in a foam cannon for a touchless pre-wash, or diluted in a bucket as a wash shampoo.
- Beer scent: a limited edition built around hops and malt.
Which vehicles to use it on
Beer Scent Snow Foam is applied to the entire bodywork, glass, and wheels of a cool vehicle placed in the shade. It is suitable for any clear-coated paint, from a production vehicle to a car protected by a wax, a sealant, or a ceramic treatment, since the formula is not designed to strip these protections.
Capacity and yield
The 473 ml bottle is dosed at 30 to 60 ml per full foam cannon, i.e., about ten complete pre-washes on a sedan, depending on the cannon setting. For bucket washing, the same dose is diluted in about 19 liters of water, which makes the bottle significantly more economical for this use. The product remains usable with a low-pressure foam gun for those who do not have a pressure washer.
Instructions for use of Beer Scent Snow Foam Chemical Guys
Beer Scent Snow Foam is dosed differently depending on whether it is used as a touchless pre-wash or as a wash shampoo. In both cases, work on a cool vehicle, in the shade, and never let the product dry on the paint.
As a pre-wash with a foam cannon
- Shake the bottle well before each use.
- Pour 30 to 60 ml into the foam cannon or foam gun reservoir.
- Fill the rest of the reservoir with lukewarm water.
- First rinse the vehicle with clean water to remove gravel and dust.
- Apply the foam from bottom to top over the entire bodywork.
- Let it work for a few minutes, without ever letting it dry.
- Rinse thoroughly from top to bottom.
As a bucket wash shampoo
- Shake the bottle.
- Pour 30 to 60 ml into a bucket, then top up with about 19 liters of water.
- Wash panel by panel with a wash mitt, from top to bottom.
- Rinse with clean water for a clean, glossy finish.
Good to know
The pH-balanced formula removes neither waxes nor sealants: it therefore fits into the maintenance of a vehicle that is already protected. Avoid direct sunlight and hot surfaces, which make the foam dry too quickly and leave marks when rinsing. Close the bottle after use and store it protected from frost.