Invisible All-Purpose Cleaner Chemical Guys 473 ml
Invisible is Chemical Guys' colorless and odorless all-purpose cleaner, formulated to remove dirt, grease and stains, without leaving any residue. It can be used neat or diluted up to 20 to 1, in the interior as well as on the exterior, in a 473 ml bottle.
Invisible Chemical Guys All-Purpose Cleaner: clean without leaving streaks
Chemical Guys Invisible All-Purpose Cleaner is a versatile cleaner, completely colorless and odorless. It is aimed at motorists and detailers who want to remove dirt, grease and stains from the entire vehicle, without risking tinting light-colored upholstery or saturating the cabin with fragrance.
Powerful cleaning without dye or fragrance
Many all-purpose cleaners contain coloring agents that can stain trim and give off harsh fumes. Invisible is, on the contrary, colorless, odorless and pH-balanced, which makes it effective on embedded dirt while remaining gentle on sensitive surfaces. In particular, it dissolves coffee, grease, wine and food stains, as well as dirt left by animals.
Compatible surfaces
- Fabrics, carpets and upholstery
- Leather and faux leather
- Plastics, vinyl and rubber
- Glass and paint
- Metal, aluminum and stainless steel
For interior as well as exterior use
Invisible can be used both in the cabin and on the exterior parts of the vehicle. It is a good prep base before treating exterior plastics, since it removes embedded grease that would prevent a dressing from bonding properly. On textured or hard-to-reach surfaces, pairing it with a detailing brush significantly improves grime extraction.
A dilution suited to each type of dirt
The product can be used neat on very dirty areas, or diluted up to 20 to 1 with water for routine maintenance. This dilution flexibility makes it possible to cover a wide range of jobs with a single 473 ml bottle and to adjust the concentration to the surface being treated.
No visible residue after wiping
Because it contains neither dye nor fragrance, Invisible leaves no film or halo. This is a direct advantage on light-colored upholstery, headliners and matte plastics, where a colored cleaner can permanently mark the surface.
Instructions for use of the Invisible Chemical Guys all-purpose surface cleaner
Invisible is used neat or diluted depending on the degree of soiling. A preliminary test on a less visible area remains essential on fabrics and fibers in order to check color fastness before treating the entire surface.
Routine cleaning of the interior
- Dilute the product in a spray bottle, up to 20 to 1 with water.
- Spray directly onto the surface or onto a clean microfiber, depending on the application.
- Leave to act for 10 to 60 seconds.
- Wipe with a clean, dry microfiber.
- Repeat the application if necessary.
Treatment of a localized stain
- Test color fastness on a hidden area of the fabric.
- Apply the product lightly diluted, or even neat, onto the stain.
- Let it penetrate for 10 to 60 seconds.
- Blot with a clean absorbent cloth.
- Repeat the operation if the stain persists.
Preparing plastics before dressing
- Spray diluted Invisible onto the plastic to be treated.
- Work the textured surface with a detailing brush.
- Wipe, let dry, then apply the finishing product.
Precautions
Systematically test fabrics and fibers on an inconspicuous area before use. Do not let the product dry on the surface and wipe with a clean microfiber. Keep the bottle closed, out of reach of children, and avoid prolonged contact with skin and eyes.