Carnauba spray wax Blazin Banana Chemical Guys 473 ml

Blazin Banana is a natural carnauba spray wax that is applied to clean bodywork or windows, with no curing time. It provides shine, a beading effect and UV protection, in a 473 ml bottle.

Blazin Banana Carnauba Spray Wax Chemical Guys: shine in a few seconds
Chemical Guys Blazin Banana spray wax is a natural carnauba wax packaged in a spray bottle: it is sprayed onto a clean bodywork, wiped with a microfiber, and leaves a glossy finish, with no dwell time at all. It is aimed at motorists who want to quickly restore shine and protection to their paint, without going through the lengthy application of a paste wax.
A natural carnauba wax ready to spray
A traditional wax is spread with an applicator pad, must set, then is removed panel by panel. The Blazin Banana formula works in just three steps: spray, wipe, buff. Natural carnauba provides the depth and warm shine sought after, on both dark shades and light paints.
- Spray application, with no drying time to observe
- Finish achieved in a few seconds per panel
- Signature banana scent of the Chemical Guys range
- 473 ml bottle
Gloss, beading effect and UV protection
Beyond the visual aspect, the layer deposited is hydrophobic: water gathers into droplets and runs off instead of stagnating on the bodywork, which limits the formation of water spots after a shower or a rinse. The formula also filters UV rays, responsible for the gradual dulling of clear coats long exposed to the sun.
- Immediate beading effect on the paint
- Reduction of water spots
- Protection against UV rays
Which surfaces to apply it on
Chemical Guys intends Blazin Banana for paint and glass. The surface must be clean before application: this wax does not clean, it protects and makes shine what has already been washed. On a bodywork that is still rough to the touch, a clay decontamination remains the essential prerequisite step.
Who this spray wax is for
It suits the driver who maintains their car every weekend as well as the detailer looking for a quick finish after a wash. Its spray format also makes it practical for occasional use before a show, a sale, or a simple outing, without taking up half a day.
Instructions for use of Blazin Banana Chemical Guys spray wax
Blazin Banana spray wax is always used on a clean surface: it is applied as a finishing step, after washing or after decontamination. Here is how to apply it depending on the situation.
After a complete wash
- Wash the vehicle, rinse it, then dry the bodywork.
- Shake the bottle vigorously before use.
- Spray a thin, even coat on only one panel at a time.
- Wipe with a clean, good-quality microfiber.
- Flip the microfiber to a dry side and buff for a streak-free finish.
- Move on to the next panel and repeat until the vehicle is covered.
For maintenance between two washes
- Check that the bodywork has no abrasive dust or embedded dirt, which would scratch the paint when wiping.
- Spray area by area, including glass.
- Wipe immediately, then buff with a clean microfiber.
Good to know
Always work panel by panel rather than on the entire car: the thin sprayed layer is much easier to remove when it is wiped off right away. Plan on several microfibers and change them as soon as they become saturated, otherwise you will re-deposit the product instead of buffing it. Official Chemical Guys documentation indicates the presence of formaldehyde in the formula under California Proposition 65 regulations: apply the product in a ventilated area and avoid contact with the eyes.
- Activate Shine and Seal Sealant Chemical Guys
- Liquid ceramic wax Ceramic Wax FullCarX
- Ceramic waterless wash HydroGlide Chemical Guys
- Liquid carnauba wax FullCarX
- Liquid Wax Quick Detailer FullCarX
- Ceramic wax Crystal Wax FullCarX
- Solid carnauba wax FullCarX
- Hydro Coat FullCarX ceramic spray
- Borderless microfiber Chemical Guys
- HydroSpin Chemical Guys ceramic wheel spray
- HydroShield Ceramic Spray Chemical Guys
- HydroLeather Leather Ceramic Spray Chemical Guys