Ready-to-use multi-purpose APC cleaner FullCarX 750 ml
Ready-to-use multi-purpose cleaner designed for cleaning a vehicle’s hard surfaces and textiles. Its foaming alkaline pH formula degreases the interior, bodywork, rims and engine compartment, in a 750 ml bottle.
Ready-to-use FullCarX APC multi-purpose cleaner: a single product for the entire vehicle
The ready-to-use FullCarX APC multi-purpose cleaner is an all purpose cleaner delivered already dosed, designed for deep and foaming cleaning of all types of hard and textile surfaces of a vehicle. It is aimed both at the individual who wants a single product for their entire car and at the detailing professional who moves from one washing task to the next.
A foaming formula with an alkaline pH
The formula has an alkaline pH and is based on benzalkonium chloride, which boosts the product’s stripping power and limits the need to scrub for a long time. Under the action of scrubbing, the APC generates abundant foam that lifts dirt and extends the contact time on vertical surfaces.
Compatible surfaces
- Bodywork, wheel arches and rims
- Door frames, seals and rubbers
- Door panels, dashboards and interior plastics
- Soft tops and fabric roofs
- Textile upholstery and mats
- Engine bay
Ready to use or to dilute
This version comes ready to spray, with no dilution or prior preparation. If you handle large volumes or if you prefer to adjust the concentration task by task, the FullCarX APC to dilute version covers the same uses starting from a concentrate.
What the APC handles on a daily basis
A single bottle covers pre-washing greasy areas, degreasing wheel arches, cleaning interior plastics and stain removal on upholstery. For a lint-free result, pair a yellow interior microfiber with cabin surfaces and a black engine microfiber with the dirtiest areas.
Capacity
The 750 ml format corresponds to routine maintenance of one or two vehicles. FullCarX offers this same ready-to-use APC in 5 L and 25 L for workshops.
Instructions for use of the ready-to-use FullCarX APC multi-purpose cleaner
The ready-to-use APC is used directly with a sprayer, without dilution. The protocol changes depending on the area treated: the exterior is rinsed with water, the interior is worked with a cloth, and the engine bay requires a short dwell time.
On exterior surfaces
- Spray the product directly onto the surface to be cleaned.
- Spread with a microfiber cloth, focusing on embedded dirt.
- Rinse thoroughly with clean water, without letting the product dry.
On the cabin and upholstery
- Spray onto the area to be treated, or onto the microfiber for sensitive surfaces.
- Spread with a microfiber cloth until the dirt is loosened.
- Remove the excess with a dry cloth, or let air-dry.
In the engine bay
- Spray onto the area to be degreased, engine cold.
- Let it act for 30 to 60 seconds.
- Spread with a detailing brush or a microfiber cloth.
- Remove residues with a dry or slightly damp cloth.
Precautions
Never let the product dry on a surface: this is the main cause of streaks. Work in the shade, on cool surfaces, and systematically rinse exterior surfaces with water. If a residual mark remains on the bodywork, a medium-cut polish applied by hand is enough to remove it. Test the product on an inconspicuous area before treating a textile or a fragile plastic.