Rinse-free shampoo Rinseless Wash FullCarX 1 L
Rinseless Wash is a pH-neutral rinseless shampoo that cleans the bodywork and leaves a hydrophobic finish in a single step. Diluted in a bucket, then removed with a microfiber, it washes and protects without using a hose, in a 1 L bottle.
Rinseless shampoo Rinseless Wash FullCarX: clean and protect without rinsing
The Rinseless Wash FullCarX rinse-free shampoo is a hybrid wash product intended for motorists and detailers who want to clean a bodywork without going through the step of hose rinsing. Diluted in a bucket, it cleans the paint and leaves a hydrophobic finish, then is removed directly with a microfiber before drying.
A pH-neutral rinse-free wash
The formula features a neutral pH, suitable for frequent maintenance use on already protected surfaces. It is used diluted, at a rate of 100 to 200 ml for 3 to 5 liters of water in a bucket, which significantly reduces water consumption compared to a classic hose wash.
Cleaning and protection in a single step
- Cleaning : the diluted product lifts everyday dirt present on the bodywork.
- Glide effect : the micro-waxes in the formula make it easier to pass the wash mitt over the clear coat.
- Hydrophobic finish : after drying, water beads on the paint and dirt clings less.
- Gloss : the bodywork comes out clean and polished, without an additional polishing step.
Protection that lasts one to two months
FullCarX indicates that the hydrophobic protection deposited by the Rinseless Wash can last one to two months, depending on vehicle use and wash frequency. It is therefore a routine maintenance product, to be integrated between two full washes or to extend a sealant already in place.
For which uses
This shampoo is intended for the regular maintenance of a lightly to moderately dirty vehicle. On a very dirty vehicle, FullCarX recommends a pre-wash before moving to the rinse-free method, in order to avoid dragging abrasive particles over the clear coat. The product belongs to the FCX Gold range, developed around high-performance components, a very high concentration, and 100 % active matter.
Instructions for use of the no-rinse shampoo Rinseless Wash FullCarX
The Rinseless Wash is always used diluted and area by area, never applied directly to the entire vehicle. Here is the method recommended by FullCarX for a complete maintenance wash.
Bucket maintenance wash
- Lightly pre-wet the surface to be treated.
- Add 100 to 200 ml of product to 3 to 5 liters of water in a bucket.
- Apply and spread the solution with the wash mitt over an area of the vehicle.
- Remove the product with a mitt or a microfiber wrung out in clean water, without product.
- Dry the area with a microfiber towel.
- Repeat area by area until the vehicle is completely cleaned.
Very dirty vehicle
- Perform a pre-wash to remove mud, sand, and the coarsest deposits.
- Then resume the bucket method described above, area by area.
Precautions
- Do not apply to hot bodywork or in direct sunlight.
- Work on only one area at a time to prevent the product from drying before being removed.
- Use clean microfibers and change them as soon as they are loaded with dirt.
- Use a stronger dose, up to 200 ml, on a more soiled vehicle.
- Blue microfiber for windows Chemical Guys
- Carbon Flex Vitalize Wash Maintenance Shampoo Chemical Guys
- Neutral pH shampoo Super Foam FullCarX
- Ferrous decontaminating shampoo Iron Shampoo FullCarX
- Ceramic shampoo Ceramic Shampoo FullCarX
- Acid shampoo Acid Shampoo FullCarX
- FullCarX microfiber wash mitt
- Supreme Wash and Wax wax shampoo Chemical Guys
- Chemical Guys Complete Detailing Kit
- Active prewash foam Kiwi Foam FullCarX
- Carnauba wax shampoo Wash and Wax FullCarX
- Active foam shampoo Snow Foam FullCarX