Fabric cleaner Interior Cleaner FullCarX 750 ml
Interior Cleaner is a ready-to-use cleaner, formulated for seat fabrics, cabin textiles, and faux leather. Its 750 ml bottle dissolves ingrained stains and leaves a fresh fragrance that neutralizes odors.
Interior fabric cleaner FullCarX: stains and odors eliminated
FullCarX Interior Cleaner is a ready-to-use textile cleaner, intended for the fabric trim of the cabin. It is aimed at motorists who want to get clean seats again without using an extractor-injector, as well as detailers who carry out interior reconditioning one after another. Its formula lifts the most stubborn dirt and leaves a fresh fragrance, which neutralizes odors embedded in the fibers.
A cleaner designed for cabin textiles
The product acts on the fiber rather than on the surface: sprayed and then worked in with a microfiber cloth or a brush, it generates a foam that brings up ingrained dirt before being wiped up with a cloth. It is this emulsification principle, then wipe-up, that makes it possible to treat a localized stain without soaking the seat.
Compatible surfaces
- Seat and headrest fabrics
- Cabin textiles, door panels and fabric headliner
- Carpets and floor mats
- Seats and materials in faux leather
For genuine leather and Alcantara, FullCarX offers dedicated formulas: this cleaner stays in its lane, that of textile and faux leather.
What the product brings on a daily basis
- Ready to use : no dilution, no dosage to calculate
- Stain-removing action on ingrained dirt and signs of wear
- Deodorizing effect thanks to a subtle fragrance that neutralizes odors rather than masking them
- Targeted or overall use : an isolated stain as well as a complete set of seats
The format offered
AGM Vision distributes the 750 ml spray bottle, the most common format for personal use or a small workshop. The FullCarX range also exists in 5 L and 25 L for operations that consume large volumes.
Instructions for use of the Interior Cleaner FullCarX fabric cleaner
Interior Cleaner is used undiluted, directly with a spray bottle. Success comes down to one specific point: remove excess foam thoroughly before it dries, otherwise halos may appear on the fabric.
Treat a localized stain
- Vacuum the area to remove dust and debris.
- Spray the product directly onto the stain.
- Rub with a microfiber cloth or a cleaning brush if the stain is deeply embedded, until you get foam.
- Remove the excess product with a clean microfiber cloth.
- Let it dry.
- Repeat the operation if the stain persists.
Clean an entire seat or carpet
- Vacuum the entire surface thoroughly.
- Work in sections of about half a square meter to prevent the product from drying.
- Spray, work into a foam with the brush, then wipe immediately with a clean microfiber cloth.
- Move on to the next section and let the cabin dry, doors open.
Good to know
- Do not dilute the product: it is formulated to be used as is.
- Carefully remove excess foam with a microfiber cloth to avoid leaving marks.
- Test first on an inconspicuous area when the fabric is old or a delicate shade.
- Change microfiber cloths as soon as they are loaded with dirt, otherwise you may redeposit the grime.