HS1 halogen bulb – motorcycle and scooter headlight 35/35W

The HS1 halogen bulb is used for the front headlight of motorcycles and scooters in 35/35W dual-filament. It operates at 12V with a power of 35/35W. The HS1 is the motorcycle-approved version of the H4, with the same P43T base, but reduced power, suited to the electrical circuits of two-wheelers. Consult the AGM Vision sheet to check compatibility.

Access the optics, unplug the connector, remove the fastener and take out the worn bulb. Insert the new HS1 without touching the glass. The operation takes 10 to 20 minutes. Replace both sides simultaneously. AGM Vision provides vehicle compatibility sheets.

The HS1 bulb exists, depending on the reference, in standard, long-life and sometimes white xenon effect (5000K-6000K) versions. The standard versions are ECE approved. AGM Vision details the versions available on each product sheet, with compared characteristics and vehicle compatibility.

The standard HS1 bulb lasts on average 500 to 800 hours. Long-life bulbs reach 1200 hours+. Lifespan depends on vibrations and the electrical circuit. AGM Vision bulbs are tested and guaranteed for their durability.

The HS1 is an uncommon reference, difficult to find in a standard auto parts store. AGM Vision stocks it in France, with shipping within 24/48h and payment in 3x/4x at no extra cost from €45.

HS1 bulbs with ECE marking comply with the technical inspection. Standard original versions are always approved. Check the E marking on the glass. AGM Vision indicates the approval on each product sheet for a risk-free purchase.