ANTI-FLASH-BUG MODULE HB3/HB4/H10 - Car
Satisfaction guaranteed!
Comfort and safety
The "Anti-Flash-Bug" OBD HB3/HB4/H10 module is based on the latest technologies. Better than any other, this HB3/HB4/H10/HIR2 digital filter module is the most effective for reducing flashes at startup (German car), as well as those while driving. Absolute weapon for "Operating bugs" such as: LED bulbs that turn off after several minutes, or the high beam mode that does not work properly. Regarding the processing and removal of OBD errors, this HB3/HB4/H10 module Anti-Flash-Bug does not use high resistances (only adds +/- 5W of consumption) and therefore cannot compensate for too low electrical consumption. If you are looking to eliminate an error due to too low electrical consumption, in this case, please rather choose the Can-Pro HB3/HB4/H10 or Supreme HB3/HB4/H10 module.
The module Anti-Flash-Bug HB3/HB4/H10 operates with a filter system controlled by a "Smart Program" coupled with capacitors and resistors, which allows it optimal control of errors as well as stability of your vehicle's electronics, notably by acting on smoothing the voltage and distributing the electrical load. A very safe anti-error module that creates no heating of wires and terminals, nor any disturbance with your electrical system. In addition, it has a powerful next-generation anti-interference filter, which will allow you to listen to the radio without crackling in the speakers.
Innovative
The Anti-Flash-Bug HB3/HB4/H10 module inaugurates a brand new system with double capacitor accumulating 20000 uf of capacity thus allowing to drastically reduce flashes, flickering and other blinking from 80% to 100% during the vehicle's start-up phases after installing a LED bulb. This phenomenon is particularly frequent on German vehicles such as BMW, MINI, VW or AUDI equipped with a "Check control" system monitoring the proper functioning of the bulbs when the vehicle is turned on. This test can last several seconds and becomes very visible after installing LEDs by creating flashing lights. If you notice this, use this Anti-Flash-Bug HB3/HB4/H10 module.
Premium Finish
This Anti-Flash-Bug module HB3/HB4/H10 of the 3rd generation has received every attention, whether in terms of material choices or even insulation, which gives it exceptional quality combined with an attractive design mixing elegance and radicality. It will be the ideal unit to enjoy your LED lighting with complete peace of mind, without disturbance. A highly recommended anti-error module for the most modern cars.
Advantages of the anti-flash-bug module:
• Plug & play installation: plug the module directly between your HB3/HB4/H10 LED bulb and the vehicle’s original HB3/HB4/H10 socket (can be combined with other anti-error modules, such as the Can-Pro HB3/HB4/H10 module).
• Reduces flashes, flickering and shimmering by 80% to 100% after the installation of LED bulbs, as well as during start-up phases, especially on German vehicles (BMW, Mini, VW, AUDI…).
• Restores normal operation of your lighting in most cases: when the high beam mode does not work properly, when only one out of two LEDs lights up right after installation, or when an LED bulb turns off while driving.
• Eliminates error messages (very effective for errors related to operating bugs and electrical instability). Warning, this Anti-Flash-Bug module will not solve errors related to too low electrical consumption; in this case, please add a Can-PRO HB3/HB4/H10 module in addition to this one.
• Eliminates radio interference.
• Low heat emission: indeed, thanks to its 100% aluminum casing and internal design, this Anti-Flash-Bug module heats up much less than a standard anti-error module.
• Extends the lifespan of your LED bulbs.