ANTI ERROR & FLASH T10 W5W HOUSING - Car
Removes the bright flashes at startup for Volkswagen, Saab, Audi, Skoda, Mercedes, etc...
Attention: this unit exclusively removes flashes related to the bulb check test when starting the vehicle. If your bulb flashes for any other reason, this unit will not solve your problem. Do not hesitate to contact us.
Satisfaction guaranteed!
OBD Error-Canceller Housing & Flash T10 W5W
Advanced T10 W5W anti-error and anti-flash unit, exclusive to AGM VISION, specially designed for German vehicles and vehicles equipped with multiplexing. An all-in-one anti-error unit allowing several functions to be combined, such as: neutralization of error lights and messages by 99%, as well as total suppression of all flashes, flickers, or other luminous blinking. Symptoms often observed after installing T10 W5W LEDs, especially on German vehicles: BMW, MINI, VW, AUDI... equipped with a system that checks the proper operation of bulbs when the vehicle is started. The test can last several seconds and is often very visible after installing T10 W5W LED bulbs, creating the appearance of light flashes. If you notice this, use the T10 anti-error & flash unit to fix it.
AGM VISION custom design: indeed, this supreme T10 unit is entirely manufactured in our workshop with the greatest care. All our finished products are tested and approved to guarantee you the best possible quality and thus meet the demands of our most demanding customers.
Advantages of the OBD Error Canceller & Flash T10 W5W:
• Total suppression at 100% of flashes, flickers, and scintillations appearing after installing a T10 W5W LED bulb during start-up phases, especially on German vehicles, examples: BMW, Mini, VW, AUDI… and Swedish ones, which are very complicated, even more so (example: Saab).
• Suppression at 99% of error messages (increases electrical consumption by +/- 2.5 watts).
– Easy to install thanks to Plug&Play connectors.
– Very safe casing, which generates very little heat. Indeed, due to its specific design, this casing provides perfect insulation against heat but also against humidity. All internal components are thus perfectly protected.
AGM VISION Tips:
Attention, this unit exclusively suppresses only the flashes related to the bulb verification test when the vehicle is started. If your bulb flashes for any other reason, this unit will not solve your problem. Do not hesitate to contact us.
This unit is quite large in size, please check that you have enough space for its installation.
If you notice any issue of a bad contact related to the Plug & Play connector, do not worry, this can happen on certain vehicles. In this specific case, you should try to tighten the contacts inside the connectors, or simply make a new electrical connection using crimp terminals or soldering. Do not hesitate to contact us, we will send you supplies for troubleshooting free of charge.