Polish EXTREME V32 (118ML) CHEMICAL GUYS
Extreme Abrasive Polish (118ml) for removing the most difficult imperfections....
Satisfaction guaranteed!
V32 Optical Grade Extreme Compound:
V32 Optical Grade Extreme Compound is designed with advanced technology to eliminate paint defects and the most extreme imperfections. V32 uses micro-abrasive technology of quality to restore the oldest paints and polish freshly painted surfaces. V32 is intended to eliminate heavy paint imperfections for precision results, while preparing the surface for the final polishing steps. V32 is the first water-based polish approved by manufacturers, designed to permanently eliminate major paint imperfections and defects caused by scratch-resistant ceramic coatings. The micro-abrasives quickly remove imperfections, scratches, and swirls from sanding with a 1200-1500 grit. V32 offers fast polishing power with fewer passes to quickly restore your vehicle's finish.
Compliant with standards, V32 adapts to all types of paint. It is specially designed to work with water-based paints and ceramic-based clear coats.
Instructions for use:
Work on a cool surface. Shake well. Always work section by section of 40 cm x 40 cm at a time.
Application with orbital machine:
- Apply 4 to 5 drops on the desired pad.
- Lightly spray the pad with Chemical Guys pad conditioner.
- Spread the polish on the bodywork with speed setting 1 to distribute the product.
- Set the speed of the orbital machine to 5-6. Using moderate pressure, work the area in 2 to 3 passes until the polish becomes clear. Finish with light pressure to complete.
- Remove residues with a clean microfiber cloth.
- Finish with V36 final polish for perfect clarity.
Application with rotary machine:
- Apply 4 to 5 drops on the desired pad.
- Lightly spray the pad with Chemical Guys pad conditioner.
- Set the machine between 1,000 and 1,500 rpm to distribute the product.
- Work section by section of 40 cm x 40 cm at a time. Use only the weight of the machine (without pressure), work the area in 3 to 4 passes until polishing is complete.
- For the final pass, adjust the speed between 1,200 and 1,800 rpm. Work until optimal clarity is achieved.
- Remove residues with a clean microfiber cloth.
- Finish with V36 final polish for perfect clarity.