ANTI-FLASH-BUG MODULE H3 - Car
H3 module / filter, Removes bugs and reduces light flashes.(Know that it is necessary to buy one module per LED bulb)
⚠️ Special attention : our module may not work properly and may not provide any result if your LEDs are not from the AGM Vision brand. Please contact us before your purchase to check compatibility.
Satisfaction guaranteed!
Comfort and safety
The module « Anti-Flash-Bug » OBD H3 relies on the latest technologies. Better than any other, this H3 digital filter module is the most effective for reducing flashes at startup (German car) as well as those while driving. Ultimate weapon against « malfunction bugs », such as: LED bulbs that turn off after several minutes or the high beam mode that does not work properly. Regarding the processing and removal of OBD errors, this H3 module Anti-Flash-Bug does not use high resistances (adds only +/- 5W of consumption) and therefore will not compensate for too low electrical consumption. If you are looking to eliminate an error due to too low electrical consumption, please choose the Can-Pro H1 or Supreme H3 module instead.
The module Anti-Flash-Bug H3 operates with a filter system controlled by a « Smart Program » coupled with capacitors and resistors, which allows optimal control of errors as well as electronic stability of your vehicle. It acts particularly on smoothing the voltage and on the distribution of electrical load. A very safe anti-error module, which creates no heating of wires and terminals nor any interference with your electrical system. In addition, it has a powerful latest-generation anti-interference filter, allowing you to listen to the radio without crackling in the speakers.
Innovative
The module Anti-Flash-Bug H3 introduces an all-new system with a double capacitor combining 20000 uf of capacity, thus allowing to drastically reduce flashes, flickering and other blinking by 80% to 100% during the startup phases of the vehicle after installing an LED bulb. This is particularly notable on German vehicles: BMW, MINI, VW, AUDI… Equipped with a (Check control) monitoring system that checks the proper functioning of the bulbs when the vehicle is turned on. This test can last several seconds and often becomes very visible after installing LEDs by causing flashes of light. If you notice this, use this module Anti-Flash-Bug H3.
Premium Finish
This module Anti-Flash-Bug Ultra H3 of 3rd generation has received all the attention, whether in terms of choice of materials or even insulation, which gives it exceptional quality combined with an attractive design mixing elegance and radicality. It will be the ideal box to enjoy your LED lighting in complete peace of mind, without disturbance. A highly recommended anti-error module for the most modern cars.
Advantages of the Anti-Flash-Bug module:
• Plug&play assembly: connect the module directly between your H3 LED bulb and the vehicle's original H3 socket (can be combined with other anti-error modules, such as the Can-Pro H3 module).
• Reduces flashes, flickering, and shimmering occurring after installing an LED bulb by 80% to 100%, as well as during startup phases, especially on German vehicles (BMW, Mini, VW, AUDI…).
• Restores normal operation of your lighting in most cases: when the high beam mode does not work properly, when only one out of two LEDs lights up right after installation, or when an LED bulb turns off while driving.
• Eliminates error messages (very effective for errors related to malfunctions and electrical instability). Attention: this Anti-Flash-Bug module will not solve errors related to too low electrical consumption. In this case, please add a Can-PRO H3 module in addition to this one.
• Eliminates radio interference.
• Low heat emission: indeed, thanks to its 100% aluminum shell and its internal design, this Anti-Flash-Bug module heats up much less than a classic anti-error module.
• Extends the lifespan of your LED bulbs.