2 x SUPREME ERROR CANCELLER MODULES H4
The Suprême H4 anti-error module removes 96% of a vehicle's OBD error lights thanks to its intelligent system that automatically regulates power consumption to 55w.
Satisfaction guaranteed!
Multifunction anti-error housing
The H4 Supreme anti-error module is simply one of the best anti-error modules currently available. As a result of the 4th generation, it fills all the gaps of its predecessors (Can-Pro and Ultra). In fact, this Supreme H4 anti-error module combines the best features in a single unit. This all in one module eliminates 96% of OBD error lights thanks to a brand new intelligent system that automatically regulates your electric consumption at 55w (value corresponding to the consumption of your original bulb). Your comfort will not be neglected either! This H4 anti-error module Supreme adopts one of the most effective anti-flicker systems for LED bulbs (a reduction in flashes at startup and while driving from 80% to 100%) in its extreme version. The Supreme module acts as a high power relay, which allows for a marked improvement in electrical connections especially against overheating issues as well as all cuts, drops or surges in voltage, not to mention optimal insulation against all electrical interference. An ultra-safe module which will be a first choice and is particularly recommended for all very high-end cars, German cars (BMW, MERCEDES, VW, AUDI…) as well as all vehicles equipped with multiplexing or complex embedded electronic systems. If you do not want to take any risks choose this 100% safe unit. (Guaranteed risk-free for your electronic control units)
TO KNOW: The SUPRÊME Box has 2 installation modes.
INSTALLATION MODE N°1: (Mounting the box only without electrical harnesses)
With mode 1: the H4 Supreme anti-error module will behave like a classic anti-error unit, comparable to its little brother the H4 Ultra anti-error module (adds +/- 5 Watts), but with slightly more efficiency for OBD error suppression. If you do not want to spend too much time on installation, you can start with this installation mode no.1: it is sufficient in the majority of cases. However, note that with installation mode no.1, the resistance emitted by the Supreme H4 module may be slightly too low, which can cause a persistent OBD error. In this case, you have two solutions: add an additional module, for example a Can-PRO H4 module (connected in series in addition to your Supreme module); with this method, you will significantly increase your chances of removing your error warning light. Another solution: use connection mode no.2.
INSTALLATION MODE No.2: (Assembly with wiring harness on battery)
With mode 2: the Supreme H4 anti-error module will then be in extreme version. You will benefit from all the features and advantages offered by this unit, including the activation of the intelligent automatic power adaptation system (helps avoid 96% of OBD error lights), a system that maintains power between 50 watts and 55 watts in real time, corresponding to the exact consumption of your original bulb. To support LED bulbs, the Supreme module has a wide power range from 5 to 75 watts, allowing optimal adaptation regardless of the power of the chosen LED, whether it is very powerful, not at all, or even with several added Can Bus units. The Supreme module will always regulate to the same power value. (Now, thanks to the Supreme unit, no more hassles looking for the right anti-error module, as this one will always adapt perfectly to your installation.)
The Supreme unit will become your best ally to benefit from unbeatable reliability, significantly increasing the lifespan of your LEDs while ensuring optimal protection of your onboard electrical system (power unit, power supply, etc.). To do this, the Supreme unit features an innovative and clever "double stage" operation, composed of 2 perfectly isolated and distinct electrical circuits: a dedicated power circuit to guarantee you an excellent quality power supply, stable, without any interference or even cuts, drops or surges in voltage; and finally a circuit dedicated only to electronic control handling only signals for OBD error detection.
ADVANTAGES of the SUPRÊME case:
• Plug&play assembly, only with the Installation Mode No. 1, plug the module directly between your H4 LED bulb and the original H4 socket of the vehicle (can be combined with other anti-error modules such as the Can-Pro H4 module).
• Extends the lifespan of your LED or Xenon kits.
• Removes 96% of OBD error messages.
• Eliminates radio interference.
• Reduces flashes, flickers and twinkles from 80% to 100% appearing after the installation of LED bulbs during startup phases, especially on German vehicles (BMW, Mini, VW, Audi…)
- Ideal for those who wish to install LEDs on vehicles powered by alternating current (not equipped with regulation devices), for example: vintage vehicles, motorcycles, quads, scooters… The Supreme module restores optimal and continuous electric power supply without voltage or current oscillation.
• Restores normal operation of your lighting in most cases: when high beam mode does not work properly, when only one out of two LEDs lights up right after installation or when an LED bulb turns off while driving. It also corrects all minor electrical instabilities of LED bulbs during their operation.
• Double protection against short circuits to prevent all related risks (protection of vehicle components: sockets, wiring harnesses, electronic units…)
• Effectively fights against the risks of electrical failure: electronic unit, windshield wiper… etc., following the installation of LEDs (problem very often linked to the addition of too strong resistors creating overheating in electronic units). With this Supreme box in Installation Mode No.2, no more worries about electrical consumption looking for the right resistor or the right anti-error module to use. With the Supreme anti-error module there is no compatibility problem because the power will be automatically adjusted to the ideal operating value of your original bulb.
• Note: The Supreme anti-error module is also 100% compatible for a Xenon installation (connection to the ballast).