2 x SUPREME ERROR CANCELLER MODULES HIR2/H10
With the Suprême HIR2/H10 anti-error module, benefit from an all-in-one smart box: reduction of flashes and elimination of 96% of the vehicle's ODB errors.
Satisfaction guaranteed!
Multifunction anti-error housing
The anti-error module HIR2/H10 Supreme is quite simply one of the best anti-error modules currently available. Resulting from the 4th generation, it corrects all the shortcomings of its predecessors (Can-Pro and Ultra). Indeed, this Supreme anti-error module HIR2/H10 brings together the best functions in a single unit. This "All in one" module removes 96% of OBD error lights thanks to an entirely new intelligent system that automatically regulates your power consumption to 55w (value corresponding to the consumption of your original bulb). Your comfort will not be neglected either! This anti-error module HIR2/H10 Supreme uses one of the most effective anti-flicker systems for LED bulbs (an initial and running flash reduction of between 80% and 100%). In its extreme version the Supreme module acts as a high-power relay which allows for a significant improvement in electrical connections in particular against overheating problems as well as all cuts and voltage drops or surges; not forgetting optimal insulation against all electrical interference. An ultra-safe module that will be a first-choice and highly recommended for all high-end cars: German cars (BMW MERCEDES VW AUDI…) as well as all vehicles equipped with multiplexing or complex embedded electronic systems. If you don't want to take risks choose this 100% safe unit. (Guaranteed risk-free for your electronic control units)
TO KNOW: The SUPRÊME Box has 2 installation modes.
INSTALLATION MODE N°1: (Mounting the box only without electrical harnesses)
With mode 1 : the HIR2/H10 anti-error module Supreme will behave like a classic anti-error box, comparable to its little brother the HIR2/H10 Ultra anti-error module (adds +/- 5 Watts), but with slightly more efficiency for OBD error suppression. If you do not want to spend too much time on installation, you can start with this installation mode No.1: it is sufficient in the majority of cases. Note however that with installation mode No.1, the resistance emitted by the Supreme module HIR2/H10 may be slightly too low, which can induce a persistent OBD error. In this case two solutions are available to you : add an additional module (example: a Can-PRO module HIR2/H10), connect it (in series) in addition to your Supreme module. With this method, you will significantly increase your chances of removing your fault indicator. Another solution : use connection mode No.2.
INSTALLATION MODE No.2: (Assembly with wiring harness on battery)
With mode 2: the Supreme HIR2/H10 anti-error module will then be in extreme version. You will thus benefit from all the features and advantages offered by this unit, notably the activation of the intelligent automatic power adaptation system (allows to avoid 96% of OBD error lights). This system maintains the power between 50 watts and 55 watts in real time, corresponding to the exact consumption of your original bulb. To support LED bulbs, the Supreme module has a wide power range from 5 to 75 watts, allowing optimal adaptation, no matter the power of the chosen LED, whether it is very powerful, low-power or even with several additional Can Bus units. The Supreme module will always regulate to the same power value. (Now, thanks to the Supreme unit, no more hassle looking for the right anti-error module, because this one will always adapt perfectly to your installation.)
The Supreme unit will become your best ally for enjoying unbeatable reliability, allowing you to significantly multiply the lifespan of your LEDs, while ensuring optimal protection of your onboard electrical system (power unit, electrical supply, etc.). For this, the Supreme unit has an unprecedented and clever "two-stage" operation, composed of 2 perfectly isolated and distinct electrical circuits: a dedicated power circuit to guarantee you an excellent quality electrical supply, stable, without any disturbance nor even cuts, drops or surges in voltage, and finally a circuit dedicated only to electronic control dealing only with signals for OBD error detection.
ADVANTAGES of the SUPRÊME case:
• Plug&play installation, only with the Installation Mode N°1, connect the module directly between your LED bulb HIR2/H10 and the original HIR2/H10 socket of the vehicle (can be combined with other anti-error modules such as the Can-Pro HIR2/H10 module).
• Extends the lifespan of your LED or Xenon kits
• Removes 96% of OBD error messages
• Eliminates radio interference
• Reduces flashes, flickers and twinkles appearing after installing LED bulbs during start-up phases by 80% to 100%, especially on German vehicles (BMW, Mini, VW, Audi…)
- Ideal for those who want to install LEDs on a vehicle powered by alternating current (not equipped with a regulation device). Example: vintage vehicle, motorcycle, quad bike, scooter… The Supreme module allows optimal and continuous electrical supply to be restored without voltage or intensity oscillation.
• Restores normal operation of your lighting in most cases: when high beam mode does not work properly, when only one out of two LEDs lights up just after installation or when an LED bulb turns off while driving. It also corrects all small electrical instabilities of LED bulbs during their operation.
• Double protection against short circuits preventing all related risks (protection of vehicle components: sockets, harnesses, electronic control units…)
• Effectively combats risks of electrical failure: electronic control unit, wiper… etc., following the installation of LEDs (problem very often related to the addition of resistors that are too strong which create overheating in the electronic control units). With this Supreme box in Installation Mode N°2, do not worry about anything whether it is about electrical consumption when looking for the right resistor or the right anti-error module to use. With the Supreme anti-error module there is no incompatibility issue as the power will automatically be adjusted to the ideal operating value for your original bulb.
• Note: the Supreme anti-error module is also 100% compatible for a Xenon installation (connection to the ballast).