SUPREME ANTI ERROR MODULES Universal 12 volts
With the Supreme Universal anti-error module, benefit from an all-in-one intelligent unit: reduction of flashes and elimination of 96% of the vehicle's ODB errors.
(Please note, it is necessary to purchase one module per LED bulb. For the installation of this module, it is necessary to cut the power wires of your bulb; a wiring diagram is provided.)
Satisfaction guaranteed!
Multifunction anti-error housing
The Supreme Universal Anti-error Module is quite simply one of the best anti-error systems available. Resulting from the 4th generation, it addresses all the shortcomings of its predecessors (Can-Pro and Ultra). Indeed, this Supreme Universal Anti-error Module brings together the best features in one single unit. This all-in-one module eliminates 96% of OBD error lights thanks to a completely new intelligent system, allowing your power consumption to be automatically regulated at 55W (value corresponding to your original bulb's consumption). Your comfort will not be neglected either! This Universal Anti-error Module Supreme adopts one of the most effective anti-flicker systems for LED bulbs (an 80% to 100% reduction in flashes at startup and while driving). In its extreme version, the Supreme module acts as a high power relay, which allows for a clear improvement in electrical connections especially against overheating problems as well as all cuts or fluctuations in voltage not to mention optimal isolation against all electrical interferences. An ultra-safe module that will be a top choice and particularly recommended for all high-end cars and German cars (BMW MERCEDES VW AUDI…) as well as all vehicles equipped with multiplexing or complex onboard electronic systems. If you do not want to take risks choose this 100% safe unit. (Guaranteed risk free for your electronic control units)
TO KNOW: The SUPRÊME Box has 2 installation modes.
INSTALLATION MODE N°1: (Mounting the box only without electrical harnesses)
With mode 1: the Universelle Supreme anti-error module will behave like a classic anti-error box, comparable to its little brother, the Universelle Ultra anti-error module (adds +/- 5 Watts), but with slightly more efficiency for suppressing OBD errors. If you do not wish to spend too much time on installation, you can start with this installation mode n°1, it is sufficient in the majority of cases. However, note that with installation mode n°1, the resistance emitted by the Supreme Universelle module may be slightly too low, which can induce a persistent OBD error. In this case, two solutions are available to you: add an additional module, for example a Can-PRO Universelle module (to be connected in series) in addition to your Supreme module; with this method, you will significantly increase your chances of removing your fault light. Another solution: use connection mode n°2.
INSTALLATION MODE No.2: (Assembly with wiring harness on battery)
With mode 2: the Supreme Universal anti-error module will then be in extreme version. You will benefit from all the features and advantages offered by this unit, including the activation of the intelligent automatic power adaptation system (prevents 96% of OBD error lights), a system that maintains the power between 50 watts and 55 watts in real time, corresponding to the exact consumption of your original bulb. To support LED bulbs, the Supreme module has a wide power range from 5 to 75 watts, allowing optimal adaptation regardless of the power of the chosen LED, whether it is very powerful, not at all, or even with several added Can Bus units. The Supreme module will always regulate to the same power value. (Thanks to the Supreme unit, no more hassle searching for the right anti-error module, as this one will always adapt perfectly to your installation.)
The Supreme unit will become your best ally to benefit from unbeatable reliability, allowing you to significantly increase the lifespan of your LEDs while ensuring optimal protection of your embedded electrical system (power unit, electrical supply, etc.). For this, the Supreme unit features an innovative and clever "dual stage" operation made up of 2 perfectly isolated and distinct electrical circuits: a dedicated power circuit to guarantee excellent quality power supply, stable, without any disturbances or even cuts, drops or surges in voltage; and finally a circuit dedicated only to electronic control dealing only with signals for OBD error detection.
ADVANTAGES of the SUPRÊME case:
• Plug&play assembly, only with the Installation Mode N°1, connect the module directly between your LED bulb HIR2/H10 and the vehicle's original universal socket (can be added with other anti-error modules such as the universal Can-Pro module).
• Extends the lifespan of your LED or Xenon kits.
• Removes 96% of OBD error messages.
• Eliminates radio interference.
• Reduces by 80% to 100% the flashes, flickers and scintillation appearing after installing LED bulbs during startup phases, especially on German vehicles (BMW, Mini, VW, Audi…)
- Ideal for those who wish to install LEDs on a vehicle powered by alternating current (not equipped with a regulation device), example: vintage vehicle, motorcycle, quad, scooter… The Supreme module restores optimal and continuous electrical power supply without voltage or intensity oscillation.
• Restores normal functioning of your lighting in most cases: when the high beam mode does not work correctly, when only one out of two LEDs lights up just after installation or when an LED bulb goes out while driving, as well as all small electrical instabilities of LED bulbs during their operation.
• Double protection against short circuits to avoid all related risks (protection of vehicle components: sockets, wiring harnesses, electronic control units…)
• Effectively combats the risk of electrical failure: electronic control unit, wiper… etc., following the installation of LEDs (a problem very often related to adding a resistor that is too strong causing overheating in the electronic control units). With this Supreme box in installation mode N°2, do not worry about anything regarding electricity consumption by searching for the right resistor or looking for the right anti-error module to use. With the Supreme anti-error module there is no compatibility problem because the power will be automatically adjusted to the ideal operating value for your original bulb.
• Note: the Supreme anti-error module is also 100% compatible for a Xenon installation (connection to the ballast).