ANTI ERROR MODULE Can-PRO HIR2/H10
With its slim size, the Can-PRO HIR2/H10 anti-error module eliminates 95% of OBD errors. Designed to increase the electrical consumption of your vehicle's LEDs, this unit can be used safely. For your information, it is necessary to have one module for each LED bulb.
⚠️ Special attention: our module may not work properly and may not provide any result if your LEDs are not from the AGM Vision brand. Please contact us before your purchase to check compatibility.
Satisfaction guaranteed!
Can-PRO HIR2/H10, an ultra-robust module
The Can-PRO anti-error OBD HIR2/H10 module is a solid unit with a neat and compact design. Its quality wiring, flexible and reinforced, as well as its IP67 waterproofness, make it a model of incomparable efficiency. Installed inside or outside your headlight optics, it adapts especially to the smallest spaces. Its aluminum housing and cooling fins allow for maximum heat reduction.
Removes a maximum of OBD errors.
Are “burnt bulb” indicators showing up on your dashboard? These errors, often related to too low electrical consumption from your LEDs, can be easily fixed with a Can-PRO error-cancelling OBD HIR2/H10 module, which has a success rate of 95%. Thanks to its resistor and electronic circuit, you will add approximately 12 watts to the consumption of your bulbs and also be able to correct certain bugs on your vehicle.
The benefits of the Can-PRO HIR2/H10 unit
• OBD indicator removal
The Can-PRO OBD error canceller module HIR2/H10 is one of the best on the market for neutralizing OBD errors related to low power consumption.
• Easy installation
The unit plugs directly in Plug'N'Play between the HIR2 or H10 LED and the original HIR2 or H10 socket of the car. It can be doubled by another error-cancelling module.
• Lighting restored
With this error-cancelling module, restore standard lighting for your vehicle, especially if the high beam mode is malfunctioning (Renault Kangoo, Renault Trafic, Toyota Rav4, etc.).
AGM VISION's opinion on the Can-PRO HIR2/H10 module
We advise you to install a Can-PRO OBD error-canceller module HIR2/H10 to eliminate the error messages that appear after installing LEDs with a power of 15 to 35 watts. If your errors occur with bulbs with a power of 45 to 55 watts, a slight increase in power consumption can also be a good option.
Warning lights are still present, as well as different anomalies? This may be due to electrical instability. In this case, opt for an "Ultra" anti-error module / digital filter, a unit designed to smooth electrical current. The "Supreme" anti-error module is another solution, since it has both Can-PRO and Ultra features with its automatic power consumption regulation system and its high power relay function.
If you have already installed a Can-PRO HIR2/H10 module and OBD errors persist, you can install a second unit in series. Your chances of removing the errors on the dashboard will thus be multiplied.