HB3 9005 THALLIUM LED Bulb 85 WATTS, 16,000 LUMENS, WHITE 6500K - Motorcycle
HB3 LED, extreme power, wide and far lighting, rather recommended for competition.
The HB3 9005 Thallium LED has the maximum allowable power, without risk to your vehicle's electronics.
Satisfaction guaranteed!
AGM Vision Competition: LED HB3 9005 Thallium
The HB3 Thallium LED could be summed up in a single word : EXTREME. Its name is related to a highly toxic poison, and you will understand why later. The HB3 Thallium LED bulb's specifications had no restriction regarding the deployment of luminous power. With such instructions, the use of this type of LED is not for everyone: the brightness is such that precision is obviously harder to master, which is purely logical.
We recommend this LED mainly for low beams, but only if the headlight optics are lens-type. It should not be used on reflector headlights because its power is too high. On the other hand, it is ideal for high beams, where it can express its full potential, whether with reflector or lens-type headlights.
The HB3 Thallium LED bulb is the most powerful in our range with 85 watts and 16 000 raw Lumens per bulb or 170 Watts and 32 000 raw Lumens for 2 bulbs. It stands far ahead on the podium of the most powerful LEDs without requiring you to change the section of the power supply wires. Intended for fans of extreme light for competition, rally and not forgetting Off Road.
HB3 9005 Approved LED Comparison vs HB3 9005 Thallium LED
As you can see in the attached photo, the difference between an approved LED and a competition LED is more than obvious. We decided to carry out this test to show you just how important the contrast is between these two worlds. This is not meant to say that an approved HB3 9005 LED bulb does not provide good lighting, but simply to allow you to visually appreciate the power and the impressive size of the light spectrum of the HB3 Thallium LED bulb compared to an approved HB3 9005 LED bulb. Conversely, the latter perfectly respects the shape and size of the original spectrum; only its light intensity is higher than an original halogen bulb, as well as its color, which is whiter.
Test result carried out at a distance of 4 meters with a Peugeot 206 headlight unit:
High beam: 5300 LUX peak for the H7 Thallium LED
Low beam: 3200 LUX peak for the Approved H7 LED
HB3 9005 LED Thallium: Incredible vision! Like broad daylight
The HB3 Thallium LED bulb offers 6000K white lighting, ultra powerful and unmatched. Compared to a standard LED, such a light output was not even imaginable before, without resorting to the use of additional LED lighting, such as a light bar or LED strip. This HB3 9005 Thallium LED bulb is a real delight in the countryside or for those who live in mountainous regions. The advantage of the HB3 Thallium LED bulb lies essentially in its 85 watt power and the choice of LED chip (wide hybrid spectrum used to its maximum). The combination of both allows for lighting without shadow zones: every millimeter of asphalt will be filled with light. With such luminous intensity, your field of vision will be extra-wide but also very far-reaching. Usually, with a classic LED, a compromise is always observed: the light cannot be distributed everywhere, either far or wide, but not at a very good level in each task. The HB3 9005 LED Thallium also proves to be a very good ally for correcting existing lighting defects.
HB3 9005 LED Thallium: Arsenal of the Best Technologies
The HB3 LED Thallium bulb is truly designed like a race car and, of course, this one innovates with the best current technologies as well as the most high-end materials, essential for such a level of performance and flawless reliability.
We obviously find the Multi Tube Copper with Liquid Sodium system already known from the Millenium 2, with the addition of a high-capacity aluminum radiator, specially implemented here on this LED to multiply heat extraction, not to mention the use of rare and precious minerals such as graphene allowing, for its part, to improve all the thermoelectric conductivity in an exceptional way.
Despite what one might think, the HB3 9005 Thallium LED hardly heats up at all compared to a standard halogen bulb. Also, there is no risk to your connectors or your electrical wiring: we are still below the manufacturer safety margins.
HB3 9005 LED Thallium: New high-performance Can-Bus
The major advantage of the HB3 9005 Thallium LED bulb is its very high power. Usually, an LED is considered low-consumption, but regarding the HB3 Thallium LED, this is not really the case. It's even quite the opposite, because the consumption is higher than the original, but this parameter gives it a great anti-error capability. Thanks to this, error problems related to low power consumption are mostly inhibited. After several tests on vehicles with complex electronics, the HB3 Thallium LED has proven to be one of the LEDs best suited to solve error problems such as "burnt out bulbs", especially on Volkswagen, Audi, Skoda.
LED HB3 9005 Thallium: AGM Vision Bench Test
After several months of testing and numerous updates before its release, the HB3 Thallium LED bulb has continuously increased its luminous performance to now reach its peak around 16 000 Raw Lumens per bulb (theoretical Lumens without energy loss). To confirm the performance achieved, we carried out a validation test in real conditions in our internal laboratory using our calibrated IES radiospectrometer sphere. This test allows us to measure the actual Lumens with all the constraints, that is: thermal, electrical, and mechanical. Nothing to do with Raw Lumens which are theoretical Lumens calculated.
- 1st LED HB3 9005 Thallium: 6790.30 actual Lumens measured by AGM Vision
- 2nd LED HB3 9005 Millenium 2: 5765.70 actual Lumens measured by AGM Vision
- 3rd LED HB3 9005 Titanium XS: 3900.70 actual Lumens measured by AGM Vision
- Philips approved H7 LED: 1332.30 actual Lumens measured by AGM Vision