LED Bulb Kit H3 THALLIUM, Competition, Ultra Powerful, 170 WATTS, 32 000 LUMENS - Car
LED H3, extreme power, wide and far lighting, rather recommended for competition.
The H3 Thallium LED has the maximum admissible power, without risk to your vehicle's electronics
Satisfaction guaranteed!
AGM Vision Competition: LED H3 Thallium
The LED H1 Thallium could be summed up in a single word : EXTREME. Its name is related to a highly toxic poison, you will understand why later. The specifications for the LED H1 Thallium bulb did not undergo any restriction regarding the deployment of light power. With such instructions, using this type of LED is not for everyone. The brightness is such that precision is obviously harder to master, which is purely logical. We recommend this LED mainly for low beams, but only if the headlight optics are projector-type. It must not be used on reflector headlights because its power is too high. On the other hand, it is ideal for high beams, where it can express its full potential, whether with reflector or projector headlights. The LED H1 Thallium bulb is the most powerful in our range with 85 watts and 16 000 raw Lumens per bulb that is 170 Watts and 32 000 raw Lumens for 2 bulbs. It stands far ahead on the podium of the most powerful LEDs without being required to change the section of the electrical power wires. Intended for lovers of extreme light for competition, rallying and also Off Road.
Comparison LED H3 Approved vs LED H3 Thallium
As you can see in the attached photo, the difference between a certified LED and a competition LED is more than obvious. We decided to carry out this test to show you how important the contrast is between these two worlds. The aim is not to say that a certified H1 LED bulb does not light well, but simply to allow you to visually see the power and impressive size of the light spectrum of the H3 Thallium LED bulb compared to a certified H3 LED bulb. On the contrary, the latter perfectly respects the shape and size of the original spectrum; only its light intensity is stronger than an original halogen bulb, as well as its color being whiter.
Result of the test carried out at 4 meters distance with a Peugeot 206 headlight optic:
High beam: 5300 LUX peak for the H7 Thallium LED
Low beam: 3200 LUX peak for the certified H7 LED
H3 LED Thallium: incredible vision! Like in broad daylight
The H3 Thallium LED bulb offers 6500K white lighting, ultra powerful and unmatched. Compared to a standard LED, such a light output was not even imaginable before, without resorting to the use of additional LED lighting, such as a light bar or LED strip. This H3 Thallium LED bulb is a real treat in the countryside or for those living in mountainous regions. The advantage of the H3 Thallium LED bulb lies mainly in its 85 watt power and in the choice of the LED chip (wide hybrid spectrum exploited to its maximum). The combination of both allows for lighting without shadow zones: every millimeter of asphalt will be filled with light. With such luminous intensity, your field of vision will be extra wide, but also very far-reaching. Usually, with a classic LED, a downside is always observed: the light cannot be distributed everywhere, either far or wide, but rarely at a very good level for each task. The H3 Thallium LED also proves to be a very good ally to correct existing lighting defects.
H3 LED Thallium: Arsenal of the Best Technologies
The H3 LED Thallium bulb is truly designed like a race car. Of course, this one innovates with the best current technologies as well as the highest-end materials, essential for such a level of performance, as well as flawless reliability.
We obviously find the system Multi Tube Copper with Liquid Sodium already known on the Millenium 2, as well as the addition of a high-capacity aluminum radiator, here specially implemented on this LED to multiply heat extraction, not to mention the use of rare and precious ore such as graphene which, for its part, allows overall thermoelectric conductivity to be improved in an outstanding way.
Despite what one might think, the H3 Thallium LED hardly heats up at all compared to a standard halogen bulb. Also, there is no risk for your connectors or your electrical harness: we are still below the manufacturer's safety margins.
H3 LED Thallium: new high-performance CAN-Bus
The main advantage of the H3 Thallium LED bulb is that it has a very high power. Usually, an LED is considered low consumption, but regarding the H3 Thallium LED, this is not really the case, it's actually quite the opposite, as the consumption is higher than the original. However, this parameter gives it great anti-error capability. Thanks to this, problems related to low electrical consumption are mostly inhibited. After several tests on vehicles with complex electronics, the H3 Thallium LED proves to be one of the LEDs most suitable for solving "burnt out bulb" error problems, especially on Volkswagen, Audi, Skoda.
LED H3 Thallium: AGM Vision test bench
After several months of testing and numerous updates before its release, the H3 Thallium LED bulb has continuously increased its luminous performance to reach today its peak around 16 000 Raw Lumens per bulb (theoretical Lumens without energy loss). To confirm the achieved performance, we carried out a validation test in real conditions in our internal laboratory using our calibrated IES radiospectrometer sphere. This test allows us to measure the actual Lumens with all constraints, that is to say: thermal, electrical, and mechanical. Nothing to do with Raw Lumens, which are theoretical calculated Lumens.
- 1st H3 Thallium LED: 6790.30 actual Lumens measured AGM Vision
- 2nd H3 Millenium 2 LED: 5765.70 actual Lumens measured AGM Vision
- 3rd Titanium XS H3 LED: 3900.70 actual Lumens measured AGM Vision
- Philips approved H7 LED: 1332.30 actual Lumens measured AGM Vision