LED Bulb Kit H1 REVO 360° - 120 Watts, 22,000 Lumens, White 6000K - Car
360° LED specifically designed for projector headlights, you will benefit from very powerful and precise lighting, without shadow zones.
Please note, this LED is not recommended for low beams with chrome reflector type headlight optics because in this case, the lighting may be too diffuse and will not have a sharp light line.
Satisfaction guaranteed!
Voted best LED in the H1 360° bulb category
Finally, an LED H1 360° bulb that meets our requirements. Admittedly, it took us some time before releasing our concept, but rest assured, the wait was well worth it.
Before 2023, many types of "Triangular", "360°" or even "Quartz" LEDs already existed, but they all had one thing in common: a cruel lack of focus resulting in generally low brightness, consistently below that of a halogen H1 bulb. Back then, we noticed only one advantage: an increased field of view. But this was not advantageous enough in our opinion to be marketed. We were more satisfied with an ultra-powerful LED with opposed chips, for example: Titanium XS.
Today, with the arrival of the LED H1 Revo 360° bulb, the problems of low brightness known with older 360° LED concepts are over. The LED H1 REVO 360° bulb ushers in a whole new era! At the cutting edge of technology and featuring a very avant-garde design, the H1 LED Revo 360° bulb has exceptional brightness and no shadow zones. Its secret: its power of course, 60 Watts and 11 000 Lumens per bulb, or 120 Watts and 22 000 Lumens for 2 bulbs, not to mention the choice and location of the CSP LED chips "new generation wide spectrum", positioned as close as possible to each other. Moreover, these are almost at the absolute center. In other words, this bulb is the most efficient LED H1 360° currently available.
H1 LED REVO 360°: The comfort of LED lighting without shadow zones
Driving at night with projector headlights equipped with H1 LED REVO 360° LED bulbs is a real delight ! Its cool white 6000K lighting, its dense light coverage and without shadow zones provide an unmatched vision, without fatigue. Every detail of the road, from the front bumper to the horizon line, will be perfectly visible. With the H1 LED REVO 360° bulb, you will not notice any lack of light or stray striping on the road, a phenomenon often observed in the first 50 meters with a standard LED with opposed chips, except for very high-power LED bulbs.
Why choose the LED bulb H1 Revo 360°
Nothing better than a little comparison between a standard LED bulb (moderate power) equipped with 2 opposite chips VS our 360° LED bulb to concretely explain the advantages and weaknesses depending on the different LED technologies.
When looking at the two light spectrums, we can immediately see that the H1 REVO 360° LED bulb is the most suitable in its design for reproducing the light spectrum in its entirety, this is especially true in projector-type headlights, as shown here in the photo, because the reflection surface is very small and all the rays from the LED source can be perfectly directed through the glass lens, which necessarily allows for an impeccable light beam compared to a reflector headlight where the reflection surface is larger, but it has no ability to channel a large number of overly scattered light rays (poor precision). Note: with a projector headlight, the slightest missing light ray from the LED source will be immediately noticeable in the light output on the road, unlike a reflector-type headlight which is less sensitive and will almost never cause shadow areas despite using standard LEDs with opposite chips.
After this little technical explanation, you now understand all the interest in having LED chips arranged at 360° when you are equipped with a projector headlight: the distribution of light takes place over the entire lens, which allows for the famous lighting without shadow zones and, moreover, you benefit from a light beam perfectly compliant with the law, without any glare for other road users.
LED H1 REVO 360°: the best result without modification (reflector headlight in high beam mode)
As some may have already noticed with reflector-type headlight optics equipped with H1 bulbs, the most common situation was finding yourself unable to install a standard H1 LED (made up of 2 opposing chips) in the correct position, that is, with the head of the LED perfectly vertical and not at 45°. Unfortunately, some headlight optics have an original slot shape at 45°, which resulted in poor lighting quality afterwards. To solve this problem and benefit from proper lighting, it was necessary to do a small milling operation to turn the LED and place it in the correct position, which allowed for efficient lighting without any shadow zones. Today, with the arrival of our H1 LED REVO 360° bulb, you no longer need to modify your headlight optics. The LED head is very thin and, in addition, it features LED chips on 360° for a reflection of rays on all the reflectors (ideal LED when there are few reflectors or they are small). The H1 LED REVO 360° bulb allows you to obtain excellent quality lighting, very high performance, a wider field of vision, and no shadow zones, regardless of the constraints of the headlight. The H1 LED REVO 360° bulb is also highly appreciated for its ease of installation and the time savings it offers.
Advantages and disadvantages of the LED Revo 360° bulb
Positive points
- Very homogeneous lighting, without shadow zone on lenticulaire headlight (low beam and high beam)
- Overall brightness up to 2.5 times higher than original on lenticulaire headlight
- Also very practical to widen your lighting in high beam on reflector headlight
- Very compact LED dimensions (fan diameter 32 mm)
- Very efficient anti-error box and compact, very suitable for modern or German vehicles
- Adjustment of the 360° ring during installation
- Power 60 Watts / 11 000 Lumens (per bulb)
- Lighting white 6500K
Negative points
- Should not be used as low beam with reflector type headlight optics, as the precision of the light beam will not be compliant (risk of glare).
The LED H1 Revo 360° bulb is more specifically designed for lenticular headlight optics for use as low beam or high beam.