LED Bulb Kit HB3 9005 THALLIUM, Competition, Ultra Powerful, 170 WATTS, 32,000 LUMENS - Car
HB3 LED, extreme power, wide and long-range lighting, rather recommended for competition.
The HB3 9005 Thallium LED has the maximum admissible power, without risk to your vehicle's electronics
Satisfaction guaranteed!
AGM Vision Competition: LED HB3 9005 Thallium
The LED HB3 Thallium could be summed up in one word : EXTREME. Its name is related to a highly toxic poison, you will understand why later. The specifications for the LED HB3 9005 Thallium bulb had no restrictions regarding the deployment of luminous power. With such instructions, the use of this type of LED is not for everyone: the brightness is such that precision is obviously more difficult to master, which is purely logical. We recommend this LED mainly for low beams, but only if the headlight optics are lens type. It should not be used on reflector headlights because its power is too high. On the other hand, it is ideal for high beams where it can express its full potential, whether with reflector or lens headlights. The LED HB3 Thallium bulb is the most powerful in our entire range with 85 watts and 16 000 raw Lumens per bulb that is 170 Watts and 32 000 raw Lumens for 2 bulbs. It stands far ahead on the podium of the most powerful LEDs without having to change the section of the power supply wires. Intended for enthusiasts of extreme lighting for competition, rally and don't forget Off Road.
HB3 9005 Approved LED Comparison vs HB3 9005 Thallium LED
As you can see in the attached photo, the difference between a Homologated LED and a Competition LED is more than obvious. We decided to carry out this test to show you just how significant the contrast is between these two worlds. This was not intended to say that a homologated HB3 9005 LED bulb does not provide good lighting, but only so that you can visually appreciate the power and impressive size of the light spectrum of the HB3 Thallium LED bulb compared to a homologated HB3 9005 LED bulb. On the other hand, the latter perfectly respects the shape and size of the original spectrum; only its light intensity is stronger than an original halogen bulb, as well as its color being whiter.
Test result carried out at 4 meters distance with a Peugeot 206 headlight lens:
High beam: 5300 LUX peak for the H7 Thallium LED
Low beam: 3200 LUX peak for the Homologated H7 LED
HB3 9005 LED Thallium: incredible vision! Like broad daylight
The HB3 9005 Thallium LED bulb offers 6000K white lighting, incomparably ultra powerful. Compared to a standard LED, such a luminous output was not even imaginable before, without resorting to the use of additional LED lighting, such as a light bar or LED strip. This HB3 Thallium LED bulb is a real treat in the countryside or for those who live in mountainous regions.
The advantage of the HB3 9005 Thallium LED bulb lies mainly in its 85-watt power and the choice of LED chip (wide hybrid spectrum used to its maximum). The combination of both allows for shadow-free lighting: every millimeter of asphalt will be filled with light. With such light intensity, your field of vision will be extra wide but also very far-reaching. Usually, with a classic LED, a trade-off is always observed: the light cannot be distributed everywhere, either far or wide, but rarely at a very good level in every task. The HB3 9005 LED Thallium also proves to be a very good ally to correct existing lighting defects.
HB3 9005 LED Thallium: Arsenal of the Best Technologies
The HB3 9005 LED Thallium bulb is truly designed like a race car. Of course, this one innovates with the best current technologies as well as with the highest-end materials, essential for such a level of performance and flawless reliability.
We obviously find the Multi Tube Copper with Liquid Sodium system, already known on the Millenium 2, plus the addition of a high capacity aluminum radiator, here specially implemented on this LED to multiply heat extraction, not to mention the use of rare and precious minerals such as graphene, allowing all the same to improve the overall thermoelectric conductivity in an outstanding way.
Despite what one might think, the HB3 Thallium LED hardly heats up at all compared to a standard halogen bulb. Thus, there is no risk for your connectors nor for your electrical harness: we are still below the manufacturer's safety margins.
HB3 9005 LED Thallium: New high-performance Can-Bus
The main advantage of the HB3 Thallium LED bulb is that it has a very high power. Usually, an LED is considered low consumption, but as far as the HB3 9005 Thallium LED is concerned, this is not really the case, it's actually quite the opposite, since the consumption is higher than the original. But this parameter gives it a great anti-error capability. Thanks to this, error problems related to low electrical consumption are mostly inhibited. After several tests on vehicles with complex electronics, the HB3 Thallium LED proves to be one of the LEDs most suitable for solving "burnt out bulb" error problems, especially on Volkswagen, Audi, Skoda.
LED HB3 9005 Thallium: AGM Vision test bench
After several months of testing and numerous updates before its release, the LED bulb HB3 9005 Thallium has continuously increased its luminous performance, reaching today its peak around 16 000 raw Lumens per bulb (theoretical Lumens without energy loss). To confirm the achieved performance, we conducted a validation test under real conditions in our internal laboratory using our calibrated IES radiospectrometer sphere. This test allows us to measure the actual lumens with all constraints, that is to say: thermal, electrical, and mechanical. Nothing to do with raw lumens which are calculated theoretical lumens.
- 1st LED HB3 Thallium: 6790.30 actual lumens (AGM Vision measurement)
- 2nd LED HB3 Millenium 2: 5765.70 actual lumens (AGM Vision measurement)
- 3rd LED HB3 Titanium XS: 3900.70 actual lumens (AGM Vision measurement)
- H7 approved Philips LED: 1332.30 actual lumens (AGM Vision measurement)