LED bulb kit H3 Thallium 24V, Competition, Ultra Powerful, 170 WATTS, 32,000 LUMENS - Truck
LED H3, extreme power, wide and far lighting, rather recommended for competition.
The H3 Thallium LED has the maximum admissible power, without risk to your vehicle's electronics
Satisfaction guaranteed!
Comparison LED H3 Approved vs LED H3 Thallium
As you can see in the attached photo, the difference between a certified LED and a competition LED is more than obvious. We decided to carry out this test to show you how important the contrast is between these two worlds. The aim is not to say that a certified H1 LED bulb does not light well, but simply to allow you to visually see the power and impressive size of the light spectrum of the H3 Thallium LED bulb compared to a certified H3 LED bulb. On the contrary, the latter perfectly respects the shape and size of the original spectrum; only its light intensity is stronger than an original halogen bulb, as well as its color being whiter.
Result of the test carried out at 4 meters distance with a Peugeot 206 headlight optic:
High beam: 5300 LUX peak for the H7 Thallium LED
Low beam: 3200 LUX peak for the certified H7 LED
H3 LED Thallium: incredible vision! Like in broad daylight
The H3 Thallium LED bulb offers 6500K white lighting, ultra powerful and unmatched. Compared to a standard LED, such a light output was not even imaginable before, without resorting to the use of additional LED lighting, such as a light bar or LED strip. This H3 Thallium LED bulb is a real treat in the countryside or for those living in mountainous regions. The advantage of the H3 Thallium LED bulb lies mainly in its 85 watt power and in the choice of the LED chip (wide hybrid spectrum exploited to its maximum). The combination of both allows for lighting without shadow zones: every millimeter of asphalt will be filled with light. With such luminous intensity, your field of vision will be extra wide, but also very far-reaching. Usually, with a classic LED, a downside is always observed: the light cannot be distributed everywhere, either far or wide, but rarely at a very good level for each task. The H3 Thallium LED also proves to be a very good ally to correct existing lighting defects.
H3 LED Thallium: Arsenal of the Best Technologies
The H3 LED Thallium bulb is truly designed like a race car and, of course, it innovates with the best current technologies as well as the most high-end materials, essential for such a level of performance and flawless reliability.
We obviously find the Multi Tube Copper with Liquid Sodium system already known from the Millenium 2, as well as the addition of a high-capacity aluminum radiator, here specially implemented on this LED to multiply heat extraction, not to mention the use of a rare and precious ore such as graphene which, for its part, improves the overall thermoelectric conductivity in an exceptional way.
Despite what one might think, the H3 Thallium LED hardly heats up at all compared to a standard halogen bulb. Also, there is no risk for your connectors or your wiring harness: we are still below the manufacturer's safety margins.
H3 LED Thallium: New high-performance Can-Bus
The main advantage of the H3 Thallium LED bulb is that it has a very high power. Usually, an LED is considered low consumption, but regarding the H3 Thallium LED, this is not really the case, it's actually quite the opposite, as the consumption is higher than the original. However, this parameter gives it great anti-error capability. Thanks to this, problems related to low electrical consumption are mostly inhibited. After several tests on vehicles with complex electronics, the H3 Thallium LED proves to be one of the LEDs most suitable for solving "burnt out bulb" error problems, especially on Volkswagen, Audi, Skoda.
LED H3 Thallium: AGM Vision test bench
After several months of testing and numerous updates before its release, the H3 Thallium LED bulb has continuously improved its luminous performance, reaching today its peak at around 16 000 raw Lumens per bulb (theoretical lumens without energy loss). To confirm the obtained performance, we carried out a validation test in real conditions in our internal laboratory using our calibrated IES radiospectrometer sphere. This test allows us to measure the actual lumens with all constraints, that is: heat, electrical and mechanical. Nothing to do with raw lumens which are theoretical lumens calculated.
- 1st H3 Thallium LED: 6790.30 actual lumens measured AGM Vision
- 2nd H3 Millenium 2 LED: 5765.70 actual lumens measured AGM Vision
- 3rd H3 Titanium XS LED: 3900.70 actual lumens measured AGM Vision
- H7 approved Philips LED: 1332.30 actual lumens measured AGM Vision