LED Bulb Kit H1 THALLIUM, Competition, Ultra Powerful, 170 WATTS, 32,000 LUMENS - Car, Truck
LED H1, extreme power, wide and long-range lighting, rather recommended for competition.
The H1 Thallium LED has the maximum allowable power, without risk to your vehicle's electronics
Satisfaction guaranteed!
AGM Vision Competition: LED H1 THALLIUM
The LED H1 Thallium could be summed up in a single word: EXTREME. Its name is related to a highly toxic poison; you will understand why later. The specifications of the LED H1 Thallium bulb have not undergone any restrictions regarding the deployment of light power. With such instructions, the use of this type of LED is not for everyone. The brightness is such that precision is obviously more difficult to master, which is purely logical. We recommend this LED mainly for low beams, but only if the headlights are lenticular. It should not be used on reflector headlights, as its power is too high. On the other hand, it is ideal for high beams where it can express its full potential, whether with reflector or lenticular headlights. The LED H1 Thallium bulb is the most powerful in our entire range with 85 watts and 16 000 raw Lumens per bulb that is 170 Watts and 32 000 raw Lumens for 2 bulbs. It stands far ahead on the podium of the most powerful LEDs without having to change the section of the electrical power supply wires. Intended for fans of extreme light for competition, rallying without forgetting Off Road.
Comparison LED H1 approved vs LED H1 Thallium
As you can see in the attached photo, the difference between a Certified LED and a Competition LED is more than obvious. We decided to carry out this test to show you how important the contrast is between these two worlds. The aim is not to say that a Certified H1 LED bulb does not illuminate well, but only to allow you to visually realize the power and impressive size of the Thallium H1 LED bulb's light spectrum compared to a certified H1 LED bulb. On the contrary, this one perfectly adheres to the original spectrum's shape and size; only its light intensity is stronger than an original halogen bulb, as well as its color, which is whiter.
Test result carried out at 4 meters distance with a Peugeot 206 headlight optical unit:
High beam: 5300 LUX peak for the Thallium H7 LED
Low beam: 3200 LUX peak for the Certified H7 LED
H1 LED Thallium: Incredible vision! Like in broad daylight
The H1 Thallium LED bulb offers 6500K white lighting, incomparably ultra-powerful. Compared to a standard LED, such a light output was not even imaginable before without resorting to additional LED lighting, such as a light bar or LED strip. This H1 Thallium LED bulb is a real treat in the countryside or for those who live in mountainous regions. The advantage of the H1 Thallium LED bulb lies essentially in its 85 watt power and the choice of the LED chip (wide hybrid spectrum used to its maximum). The combination of the two allows for lighting without shadow zones: every millimeter of asphalt will be covered by the light. With such luminous intensity, your field of vision will be extra wide but also very far-reaching. Usually, with a classic LED, a downside is always noted: the light cannot be distributed everywhere, either far or wide, but rarely at a very good level in each task. The H1 Thallium LED also proves to be a very good ally to correct existing lighting defects.
H1 LED Thallium: Arsenal of the Best Technologies
The H1 LED Thallium bulb is truly designed like a race car. Of course, it innovates with the best current technologies as well as the highest-end materials, essential for such a level of performance as well as flawless reliability.
We obviously find the Multi Tube Copper with Liquid Sodium system already known from the Millenium 2, with in addition the addition of a High Capacity Aluminum Radiator, here specially implemented on this LED to multiply heat extraction, not to mention the use of rare and precious minerals such as Graphene which, for its part, improves the overall Thermoelectric conductivity in an exceptional way.
Despite what one might think, the H1 Thallium LED hardly heats up at all compared to a standard halogen bulb. Also, there is no risk for your connectors or your wiring harness: we are still below the manufacturer's safety margins.
H1 LED Thallium: New High-Performance Can-Bus
The major advantage of the LED H1 Thallium bulb is its very high power. Usually, an LED is considered low consumption, but as far as the LED H1 Thallium is concerned, this is not really the case. In fact, it's quite the opposite, as the consumption is higher than the original. But this parameter gives it great anti-error capability. Thanks to this, problems related to low electrical consumption are mostly inhibited. After several tests on vehicles with complex electronics, the LED H1 Thallium proves to be one of the LED best suited for solving error problems like "burnt out bulbs," especially on Volkswagen, Audi, Skoda.
LED H1 Thallium: AGM Vision test bench
After several months of testing and numerous updates before its release, the H1 Thallium LED bulb has continuously increased its luminous performance, to now reach its peak at around 16 000 raw Lumens per bulb (theoretical Lumens without energy loss). To confirm the achieved performance, we carried out a validation test in real conditions in our internal laboratory using our calibrated IES radiospectrometer sphere. This test allows us to measure the actual Lumens with all constraints, that is to say: thermal, electrical, and mechanical. Nothing to do with raw Lumens, which are theoretical Lumens calculated.
- 1st H1 Thallium LED: 6790.30 actual Lumens AGM Vision measurement
- 2nd H1 Millenium 2 LED: 5765.70 actual Lumens AGM Vision measurement
- 3rd H1 Titanium XS LED: 3900.70 actual Lumens AGM Vision measurement
- Philips approved H7 LED: 1332.30 actual Lumens AGM Vision measurement