LED Bulb Kit H11 THALLIUM, Competition, Ultra Powerful, 170 WATTS, 32,000 LUMENS - Car, Truck
H11 LED, extreme power, wide and long-range lighting, rather recommended for competition.
The H11 Thallium LED has the maximum allowable power, without risk to your vehicle's electronics
Satisfaction guaranteed!
AGM Vision Competition: LED H11 Thallium
The H11 Thallium LED could be summed up in one word: EXTREME. Its name is related to a highly toxic poison, you will understand why later. The specifications for the H11 Thallium LED bulb had no restrictions regarding the deployment of light power. With such instructions, the use of this kind of LED is not for everyone: the brightness is such that precision is obviously more difficult to master, which is purely logical.
We recommend this LED mainly for low beams, but only if the headlight optics are lenticular. It should not be used on reflector headlights because its power is too high. On the other hand, it is ideal for high beams where it can express its full potential, whether with reflector or lenticular headlights.
The H11 Thallium LED bulb is the most powerful in our entire range with 85 watts and 16 000 raw lumens per bulb ; that is 170 watts and 32 000 raw lumens for 2 bulbs. It stands far ahead on the podium of the most powerful LEDs without needing to change the section of the electrical power supply wires. Intended for enthusiasts of extreme light for competition, rallying not to mention Off Road.
LED H11 approved comparison vs LED H11 Thallium
As you can see in the attached photo, the difference between a certified LED and a competition LED is more than obvious. We decided to carry out this test to show you how important the contrast is between these two worlds. This is not intended to say that a certified H11 LED bulb does not provide good lighting, but only to allow you to visually realize the power and impressive size of the light spectrum of the H11 Thallium LED bulb. Compared to a certified H11 LED bulb, the latter perfectly respects the original shape and size of the spectrum; only its light intensity is stronger than an original halogen bulb, as well as its color, which is whiter.
Test result carried out at 4 meters distance with a Peugeot 206 headlight lens:
High beam: 5300 LUX peak for the H7 Thallium LED
Low beam: 3200 LUX peak for the certified H7 LED
H11 LED Thallium: incredible vision! Like in broad daylight
The H11 Thallium LED bulb has a white 6000K light, ultra-powerful and incomparable. Compared to a standard LED, such a light output was not even imaginable before, without the use of additional LED lighting, such as a ramp or LED bar. This H11 Thallium LED bulb is truly a delight in the countryside or for those living in mountainous regions. The advantage of the H11 Thallium LED bulb lies mainly in its 85-watt power and the choice of LED chip (wide hybrid spectrum used to its maximum). The combination of the two provides lighting without shadow zones: every millimeter of asphalt will be filled with light. With such luminous intensity, your field of vision will be extra wide, but also very distant. Usually, with a classic LED, there is always a trade-off noticed: the light cannot be distributed everywhere, either far or wide, but not at a very good level in every area. The H11 Thallium LED also proves to be a very good ally for correcting existing lighting defects.
H11 LED Thallium: Arsenal of the Best Technologies
The H11 LED Thallium bulb is truly designed like a race car. Of course, this one innovates with the best current technologies as well as some of the highest-end materials, essential for such a level of performance and flawless reliability.
We obviously find the Multi Tube Copper with Liquid Sodium system already known from the Millenium 2, as well as the addition of a high-capacity aluminum radiator, here specially installed on this LED to multiply heat extraction, not to mention the use of rare and precious minerals such as graphene which in turn improves the overall thermoelectric conductivity in an exceptional way.
Despite what one might think, the H11 Thallium LED hardly heats up at all compared to a standard halogen bulb. Also, there is no risk for your connectors or your wiring harness: we are still below the manufacturer's safety margins.
H11 LED Thallium: New high-performance Can-Bus
The major asset of the H11 Thallium LED bulb is its very high power. Usually, an LED is considered low consumption, but regarding the H11 Thallium LED, this is not really the case. It's actually quite the opposite, as the consumption is higher than the original, but this parameter gives it great anti-error capability. Thanks to this, error problems related to low electrical consumption are, most of the time, inhibited. After several tests on vehicles with complex electronics, the H11 Thallium LED proves to be one of the LEDs most suited to solving error problems such as "burnt out bulbs", especially on Volkswagen, Audi, Skoda.
LED H11 Thallium: AGM Vision test bench
After several months of testing and numerous updates before its release, the H11 Thallium LED bulb has continuously improved its luminous performance to reach today its peak around 16 000 raw Lumens per bulb (theoretical Lumens without energy loss). To confirm the performance achieved, we carried out a validation test under real conditions in our internal laboratory using our calibrated IES radiospectrometer sphere. This test allows us to measure the actual lumens with all constraints, that is to say: thermal, electrical and mechanical. Nothing to do with raw lumens which are calculated theoretical lumens.
- 1st H11 Thallium LED: 6 790.30 actual lumens measured AGM Vision
- 2nd H11 Millenium 2 LED: 5 765.70 actual lumens measured AGM Vision
- 3rd H11 Titanium XS LED: 3 900.70 actual lumens measured AGM Vision
- Approved H7 Philips LED: 1 332.30 actual lumens measured AGM Vision