LED bulb kit H11 Thallium 24V, Competition, Ultra Powerful, 170 WATTS, 32,000 LUMENS - Truck
H11 LED, extreme power, wide and long-range lighting, rather recommended for competition.
The H11 Thallium LED has the maximum admissible power, without risk for your vehicle's electronics
Not recommended for use as low beam, only recommended for high beam (full beam).
Satisfaction guaranteed!
H11 Approved LED Comparison vs H11 Thallium LED
As you can see in the attached photo, the difference between a Certified LED and a Competition LED is more than obvious. We decided to carry out this test to show you how significant the contrast is between these two worlds. The aim is not to say that a certified H11 LED bulb does not illuminate well, but simply to allow you to visually observe the power and impressive size of the light spectrum of the Thallium H11 LED bulb compared to a certified H11 LED bulb. Conversely, the latter perfectly respects the shape and size of the original spectrum; only its light intensity is stronger than an original halogen bulb, as well as its color being whiter.
Test result carried out at 4 meters distance with a Peugeot 206 headlight optic:
High beam: 5300 LUX peak for the Thallium H7 LED
Low beam: 3200 LUX peak for the Certified H7 LED
H11 LED Thallium: Incredible vision! Like broad daylight
The H11 Thallium LED bulb features 6000K white lighting, ultra powerful and incomparable. Compared to a standard LED, such a light output was not even imaginable before, without having to use additional LED lighting, such as a light bar or LED strip. This H11 Thallium LED bulb is a real delight in the countryside or for those living in mountainous regions. The advantage of the H11 Thallium LED bulb lies mainly in its 85 watt power and the choice of the LED chip (wide hybrid spectrum used at its maximum). The combination of the two allows for lighting without dark spots: every millimeter of asphalt will be covered with light. With such light intensity, your field of view will be extra wide but also very far-reaching. Usually, with a standard LED, a compromise is always observed: the light cannot be distributed everywhere, either far or wide, but never at a very good level in every area. The H11 Thallium LED also proves to be a very good ally to correct existing lighting flaws.
H11 LED Thallium: Arsenal of the Best Technologies
The H11 LED Thallium bulb is truly designed like a race car, and of course, it innovates with the best current technologies as well as the most high-end materials, essential for such a level of performance and flawless reliability.
We obviously find the Multi Tube Copper with Liquid Sodium system already known from the Millenium 2, as well as the addition of a High Capacity Aluminum Radiator, here specially established on this LED to multiply heat extraction, not to mention the use of rare and precious ore such as Graphene, allowing in turn to improve all of the thermoelectric conductivity in an extraordinary way.
Despite what one might think, the H11 Thallium LED hardly heats up at all compared to a standard halogen bulb. Thus, there is no risk for your connectors or your wiring harness: we are still below the manufacturer's safety margins.
H11 LED Thallium: New high-performance Can-Bus
The main advantage of the H11 Thallium LED bulb is its very high power. Usually, an LED is considered low consumption, but as far as the H11 Thallium LED is concerned, this is not really the case, it’s actually quite the opposite, since the consumption is higher than the original. However, this parameter gives it a great anti-error capability. Thanks to this, error problems related to low electrical consumption are mostly inhibited. After several tests on vehicles with complex electronics, the H11 Thallium LED proves to be one of the LEDs best suited to solve error problems such as "burnt out bulbs", especially on Volkswagen, Audi, Skoda.
LED H11 Thallium: AGM Vision test bench
After several months of testing and numerous updates before its release, the H11 Thallium LED bulb has continuously increased its luminous performance, reaching today its peak around 16 000 raw Lumens per bulb (theoretical Lumens without energy loss). To confirm the achieved performance, we carried out a validation test under real conditions in our internal laboratory using our calibrated IES radio-spectrometer sphere. This test allows us to measure the real Lumens with all the constraints, meaning: thermal, electrical, and mechanical. Nothing to do with raw Lumens, which are theoretical calculated Lumens.
- 1st H11 Thallium LED: 6790.30 real Lumens measured AGM Vision
- 2nd H11 Millenium 2 LED: 5765.70 real Lumens measured AGM Vision
- 3rd H11 Titanium XS LED: 3900.70 real Lumens measured AGM Vision
- Philips approved H7 LED: 1332.30 real Lumens measured AGM Vision