H1 LED Bulb Kit TRUCK GT-150 Watts - 23,000 Lumens - White 6500K - Truck
LED High Tech! Extra Wide Vision, OBD Anti-Errors, High-End, highly recommended for trucks with complex electronics.
Satisfaction guaranteed!
LED H1 TRUCK GT 150 WATTS: The best choice
Today, AGM Vision presents the all-new H1 Truck GT LED specially designed for heavy-duty vehicles, reinforced to withstand several hours of travel and to absorb voltage spikes beyond 24 Volts up to more than 50 Volts.
The H1 Truck GT bulb is our first LED specifically designed for heavy trucks, equipped with cutting-edge technology allowing it to break all current reliability records. Notably thanks to the introduction of a heat sink (high conductivity) radiator, for an exceptional lifespan.
As for performance, the brightness gain is colossal compared to your original bulbs, notably thanks to the use of a next-generation (wide spectrum) LED chip that allows you to widen your field of vision, without shadow zones compared to a standard LED chip. This provides real visual comfort, more relaxing for the eyes during long journeys. Last point: the H1 LED Truck bulb is also a LED perfectly suited to the electronics of the latest Mercedes and Volvo FH trucks. It features one of the best Can-Bus/EMC modules on the market, allowing the neutralization of OBD errors as well as radio interference.
H1 TRUCK GT: premium lighting quality
When truck drivers are asked, their answers are unanimous: the most important thing is wide lighting but above all as even as possible. Once again, the LED H1 24 Volts Truck GT clearly stands out in this area. It allows you to multiply the existing lighting by 4 and above all to increase the width of your field of vision. Compared to most LEDs on the market, this one has less focused lighting: the light is better distributed across the entire spectrum, which causes less eye fatigue for the driver.
The H1 LED Truck GT bulb is also highly recommended for projector-type headlights, because these require a higher light intensity than a standard headlight to benefit from optimal lighting coverage. With the Truck GT bulb, the goal is successfully achieved. Thanks to its new chip (wide spectrum), no shadow area will be observed and strong brightness will be present.
H1 Truck GT: a unique and futuristic white
Our two CREE CSP LED chips make it possible to achieve a lighting color white still unknown to this day, beyond 6500 Kelvins ! The LED H1 Truck GT thus sports a unique white, recognizable among all. Even our customers used to using LED lighting have been amazed by this icy white ! This is not surprising, as the lighting temperature of LEDs usually found on the market is generally around 6000K, far from the 6500K of the LED H1 Truck GT.
The color is so white that it reveals subtle shades of blue tending towards violet. At night, you will feel like driving in a Nordic country or on the Rally Sweden.
Note: unlike an 8000K xenon bulb possessing a very blue color, the lighting color of the LED H1 Truck GT remains very white.
H1 TRUCK GT: Technical revolution
Big words call for big actions. To design the H1 Truck GT LED bulb, we increased its electrical power by 10 Watts compared to the H1 Millenium 2 LED, going from 65 to 75 watts. This primarily allows for a better anti-error level, especially to better suit 24 Volt truck fleets. Don’t worry about your truck’s sockets and wiring harnesses, there is no risk: we are still well below the manufacturer's safety margins.
As you will notice, the chips used for this H1 LED TRUCK GT are much wider compared to those used on the H1 Millenium 2 LED bulb, which makes it possible to obtain a much broader light spectrum than the Millenium 2 LED but in return, the light range is a few meters shorter. These are details for connoisseurs. The H1 Truck GT LED bulb reaches 11 500 Raw Lumens per bulb. Warning: as a reminder, raw lumen is the maximum value that the LED can theoretically reach without energy losses. Do not confuse this with the real lumens that we measure in our premises using an IES calibrated radiospectrometer sphere.
During our test in our laboratory, the H1 Truck GT LED achieved 5 393 real lumens, almost equal to the Millenium 2 LED.
As they say, power is nothing without control.
To maintain an extreme level of performance combined with faultless reliability, during our isolated chamber test, the LED Truck GT proved capable of operating 24/7 for over 5000 hours without any sign of weakness. The key to success lies in the cooling of this monster: we used several cumulative and exclusive technologies: the Cooling Tub: a state-of-the-art cooling system made up of a pure copper tube containing a superconducting liquid coupled with a very high-quality copper heatsink (radiator) acting as a sponge to store calories in order to redistribute them to the fan located just below. The fan was also slightly optimized at the blade level, with a diameter increase of 2 mm and a speed boost from 10,000 rpm to 12,000 rpm. Nothing was neglected to improve and optimize the heat extraction speed.
Result: a regulation temperature of only 50° Celsius at the fan versus 85° Celsius with a standard LED bulb. Note that a conventional halogen bulb in operation runs around 100 to 120° Celsius at the base.
Errors reduced to 98%.
4th generation anti-error module. This 24-volt Can-Bus module is the most advanced currently available for heavy trucks. It allows you to eliminate and solve 98% of "bulb failure" warning lights. The Can-Bus module of the H1 Truck GT LED bulb allows you to bypass the most complex electronic systems of trucks, for example: Volvo FH, Mercedes, Scania, etc.
Increased comfort and reliability thanks to the addition of a wide-range voltage regulator from 24-50 volts. Unlike a standard LED not adapted for heavy trucks, the H1 Truck GT LED will not suffer any damage, especially at truck start-up when the LEDs are turned on, because at that moment large voltage spikes can be observed.
Another advantage of this Can-Bus module: it is coupled with an EMC to prevent electromagnetic interference on your truck's radio.