H7 LED Bulb Kit REVO 360° for Projector Headlight - 120 Watts, 22,000 Lumens, White 6000K - Car
360° LED specifically designed for projector headlights, you will benefit from powerful and precise lighting, without shadow zones.
The REVO 360° LED provides better light coverage compared to the original of your low beams thanks to its multi-faceted design. However, it will be less efficient than our high-performance LED ranges, such as: LED Titanium XS, with brightness multiplied by 3, or our new LED Millenium 3 equipped with wide spectrum chips very suitable for projector headlights, which allows you to multiply the light coverage by 4 as well as the first meters, and finally the LED Thallium which offers total coverage and brightness up to 5 times higher than the original.
Please note, this LED is not recommended for low beams with chrome reflector type headlight optics, as in this case, the lighting can be too diffuse and will not have a sharp light line.
Satisfaction guaranteed!
Voted best LED in the H7 360° bulb category
Finally, an H7 LED bulb 360° that meets our requirements. Admittedly, we took some time before releasing our concept, but rest assured, the wait was well worth it.
Before 2023, many types of LEDs like "Triangular," "360°," or even "Quartz" already existed, but they all had one thing in common: a severe lack of focus resulting in low overall brightness, always below the brightness of a halogen H7 bulb. At that time, we noticed only one advantage: an increased field of view. But this was not advantageous enough for our taste to be marketed. We were more satisfied with an ultra-powerful LED with opposing chips, for example: Titanium XS. The H7 REVO 360° LED bulb ushers in a whole new era! At the cutting edge of technology and featuring a very avant-garde design, the H7 LED Revo 360° bulb has very good brightness and no shadow zones. Its secret: its power of course: 60 Watts and 11,000 Lumens per bulb, or 120 Watts and 22,000 Lumens for 2 bulbs, not to mention the selection and placement of the CSP LED chips "new generation wide spectrum", placed as close together as possible. Moreover, these are almost at the absolute center. In other words, this bulb is the most efficient H7 LED 360° currently in this category.
H7 LED REVO 360°: the comfort of LED lighting without shadow zones
Driving at night with projector headlights equipped with H7 LED REVO 360 LED bulbs° is a real treat ! Its white 6000K lighting, its dense light coverage and without shadow zones allow for an unmatched vision in the first 50 to 80 meters, without fatigue: every detail of the road will be visible. With the H7 LED REVO 360° bulb, you will not notice any lack of light or parasitic streaking on the road, a phenomenon often observed in the first 50 meters with a classic LED with opposing chips. Except in rare cases, with our very high-power LED bulbs such as Titanium XS LED bulbs, Millenium 3 or even the LED H7 Thallium bulb, even though the latter is also an LED with opposing chips. And even better, the power of the Thallium is so extreme that the light coverage of the road will be total, as with the H7 REVO 360° LED bulb, but with even greater brightness.
Why choose the H7 Revo 360° LED bulb
Nothing beats a little comparison between a standard LED bulb (moderate power) equipped with 2 opposite chips VS our 360° LED bulb to concretely explain the advantages and weaknesses according to the different LED technologies.
When we look at the two light spectrums, we notice without hesitation that the LED H7 REVO 360° bulb is the most suitable in its design to reproduce the light spectrum in its entirety. This is even more true in projector-type headlights, as shown here in the photo, because the reflective surface is very small and all rays from the LED source can be perfectly directed through the glass lens, which necessarily allows a flawless light beam compared to a reflector headlight where the reflective surface is larger, but it has no ability to channel a large number of scattered light rays (poor precision). Note that with a projector headlight, any missing light ray from the LED source will immediately be felt in the reproduction of the light on the road, unlike a reflector headlight which is less sensitive and almost never causes shadow zones despite using standard LEDs with opposite chips.
After this little technical explanation, you understand all the interest of having LED chips arranged at 360° when you are equipped with a projector headlight: the distribution of the light is done over the entire lens, which allows the famous shadow-free lighting and, moreover, you benefit from a light beam perfectly compliant with the law, without any glare for other road users.
Advantages and disadvantages of the Revo 360° LED bulb
Positive points
- Very homogeneous lighting, without shadow zone on lenticulaire headlight (low beam and high beam)
- General brightness up to 2 times higher than original on lenticulaire headlight
- Allows increased lighting in the first 50 to 80 meters compared to a standard LED
- Also very practical for widening your lighting in high beam on reflector headlight
- Dimensions of the very compact LED (fan diameter 32mm)
- Highly efficient anti-error housing and compact, very suitable for modern or German vehicles
- Adjustment of the 360° ring during installation
- Power 60 Watts / 11 000 Lumens (per bulb)
- Lighting white 6000K
Negative points
- Must not be used as low beam with reflector type headlight optics, as the accuracy of the light beam will not be compliant (risk of glare).
- Lighting certainly more covering than standard design LEDs, but therefore less powerful in the area after 80 meters than a Titanium Xs, Millenium 3 or Thallium type LED.
- Not recommended for dual-function lenticular headlights, having a low beam and a high beam, as it may lack performance for high beam. This LED is only designed for lenticular headlights with a single low beam function.
The H7 Revo 360° LED bulb is more specifically designed for lenticular headlight optics for use as low beam.