H11 THALLIUM LED Bulb 85 WATTS, 16,000 LUMENS, WHITE 6500K - Motorcycle
H11 LED, extreme power, wide and long-range lighting, rather recommended for competition.
The H11 Thallium LED has the maximum allowable power, without risk to your vehicle's electronics.
Satisfaction guaranteed!
AGM Vision Competition: LED H11 THALLIUM
The LED H11 Thallium could be summed up in a single word: EXTREME. Its name is related to a highly toxic poison, and you will understand why later. The specifications for the LED H11 Thallium bulb did not undergo any restrictions regarding the deployment of luminous power. With such guidelines, the use of this type of LED is not meant for everyone: the brightness is such that precision is obviously harder to master, which is purely logical. We recommend this LED mainly for low beams, but only if the headlight optics are lens-type. It must not be used on reflector headlights because its power is too high. On the other hand, it is ideal for high beams, where it can show its full potential whether with reflector or lens headlights. The LED H11 Thallium bulb is the most powerful in our entire range with 85 watts and 16 000 raw Lumens per bulb that is 170 Watts and 32 000 raw Lumens for 2 bulbs. It stands far ahead on the podium of the most powerful LEDs without having to change the section of the power supply wires. Intended for enthusiasts of extreme light for competition, rallying and also Off Road.
Comparison LED H11 Approved vs LED H11 Thallium
As you can see in the attached photo, the difference between a certified LED and a competition LED is more than obvious. We decided to carry out this test to show you just how important the contrast is between these two worlds. The aim is not to say that a certified H11 LED bulb does not light well, but only to allow you to visually appreciate the power and the impressive width of the light spectrum of the H11 Thallium LED bulb compared to a certified H11 LED bulb. Conversely, the latter perfectly respects the shape and size of the original spectrum; only its light intensity is stronger than an original halogen bulb as well as its color, which is whiter.
Test result performed at 4 meters distance with a Peugeot 206 headlight optic:
High beam: 5300 LUX peak for the H7 Thallium LED
Low beam: 3200 LUX peak for the certified H7 LED
H11 LED Thallium: Incredible vision! Like broad daylight
The H11 Thallium LED bulb features 6000K white lighting, ultra powerful and incomparable. Compared to a standard LED, such a light output was not even imaginable before, without having to use additional LED lighting, such as a light bar or LED strip. This H11 Thallium LED bulb is a real delight in the countryside or for those living in mountainous regions. The advantage of the H11 Thallium LED bulb lies mainly in its 85 watt power and the choice of the LED chip (wide hybrid spectrum used at its maximum). The combination of the two allows for lighting without dark spots: every millimeter of asphalt will be covered with light. With such light intensity, your field of view will be extra wide but also very far-reaching. Usually, with a standard LED, a compromise is always observed: the light cannot be distributed everywhere, either far or wide, but never at a very good level in every area. The H11 Thallium LED also proves to be a very good ally to correct existing lighting flaws.
H11 LED Thallium: Arsenal of the Best Technologies
The H11 LED Thallium bulb is truly designed like a race car, and of course, it innovates with the best current technologies as well as the most high-end materials, essential for such a level of performance and flawless reliability.
We obviously find the Multi Tube Copper with Liquid Sodium system already known from the Millenium 2, as well as the addition of a High Capacity Aluminum Radiator, here specially established on this LED to multiply heat extraction, not to mention the use of rare and precious ore such as Graphene, allowing in turn to improve all of the thermoelectric conductivity in an extraordinary way.
Despite what one might think, the H11 Thallium LED hardly heats up at all compared to a standard halogen bulb. Thus, there is no risk for your connectors or your wiring harness: we are still below the manufacturer's safety margins.
H11 LED Thallium: New high-performance Can-Bus
The main advantage of the H11 Thallium LED bulb is its very high power. Usually, an LED is considered low consumption, but as far as the H11 Thallium LED is concerned, this is not really the case, it’s actually quite the opposite, since the consumption is higher than the original. However, this parameter gives it a great anti-error capability. Thanks to this, error problems related to low electrical consumption are mostly inhibited. After several tests on vehicles with complex electronics, the H11 Thallium LED proves to be one of the LEDs best suited to solve error problems such as "burnt out bulbs", especially on Volkswagen, Audi, Skoda.
LED H11 Thallium: AGM Vision test bench
After several months of testing and numerous updates before its release, the H11 Thallium LED bulb has continuously increased its luminous performance, reaching today its peak around 16 000 raw Lumens per bulb (theoretical Lumens without energy loss). To confirm the achieved performance, we carried out a validation test under real conditions in our internal laboratory using our calibrated IES radio-spectrometer sphere. This test allows us to measure the real Lumens with all the constraints, meaning: thermal, electrical, and mechanical. Nothing to do with raw Lumens, which are theoretical calculated Lumens.
- 1st H11 Thallium LED: 6790.30 real Lumens measured AGM Vision
- 2nd H11 Millenium 2 LED: 5765.70 real Lumens measured AGM Vision
- 3rd H11 Titanium XS LED: 3900.70 real Lumens measured AGM Vision
- Philips approved H7 LED: 1332.30 real Lumens measured AGM Vision