H1 THALLIUM LED Bulb 85 WATTS, 16,000 LUMENS, WHITE 6500K - Motorcycle
H1 LED, extreme power, wide and far lighting, rather recommended for competition.
The H1 Thallium LED has the maximum allowable power, without risk to your vehicle's electronics.
Satisfaction guaranteed!
AGM Vision Competition: LED H1 THALLIUM
The LED H1 Thallium could be summed up in a single word : EXTREME. Its name is related to a highly toxic poison, you will understand why later. The specifications for the LED H1 Thallium bulb did not undergo any restriction regarding the deployment of light power. With such instructions, using this type of LED is not for everyone. The brightness is such that precision is obviously harder to master, which is purely logical. We recommend this LED mainly for low beams, but only if the headlight optics are projector-type. It must not be used on reflector headlights because its power is too high. On the other hand, it is ideal for high beams, where it can express its full potential, whether with reflector or projector headlights. The LED H1 Thallium bulb is the most powerful in our range with 85 watts and 16 000 raw Lumens per bulb that is 170 Watts and 32 000 raw Lumens for 2 bulbs. It stands far ahead on the podium of the most powerful LEDs without being required to change the section of the electrical power wires. Intended for lovers of extreme light for competition, rallying and also Off Road.
Comparison LED H1 approved vs LED H1 Thallium
As you can see in the attached photo, the difference between a certified LED and a competition LED is more than obvious. We decided to carry out this test to show you just how important the contrast is between these two worlds. This is not intended to say that a certified H1 LED bulb does not illuminate well, but simply to allow you to visually appreciate the power and impressive size of the light spectrum of the H1 Thallium LED bulb compared to a certified H1 LED bulb. Conversely, the latter perfectly respects the shape and size of the original spectrum; only its light intensity is stronger than an original halogen bulb, as well as its color, which is whiter.
Test result performed at 4 meters distance with a Peugeot 206 headlight optic:
High beam: 5300 LUX peak for the H7 Thallium LED
Low beam: 3200 LUX peak for the certified H7 LED
H1 LED Thallium: Incredible vision! Like in broad daylight
The H1 Thallium LED bulb has a 6000K white lighting, ultra powerful and unmatched. Compared to a standard LED, such luminous output was not even imaginable before without having to use additional LED lighting, such as a ramp or LED bar. This H1 Thallium LED bulb is truly a delight in the countryside or for those who live in mountainous regions.
The advantage of the H1 Thallium LED bulb lies mainly in its 85-watt power and in the choice of the LED chip (wide hybrid spectrum used to its maximum). The combination of both allows for lighting without shadow zones: every millimeter of asphalt will be covered by light. With such light intensity, your field of vision will be extra wide but also very far-reaching. Usually, with a classic LED, there is always a trade-off: the light cannot be distributed everywhere, either far or wide, but not at a very good level in every task. The H1 Thallium LED also proves to be a very good ally for correcting existing lighting defects.
H1 LED Thallium: Arsenal of the Best Technologies
The H1 LED Thallium bulb is truly designed like a race car. Of course, it innovates with the best current technologies as well as the highest-end materials, essential for such a level of performance as well as flawless reliability.
We obviously find the Multi Tube Copper with Liquid Sodium system already known from the Millenium 2, with in addition the addition of a High Capacity Aluminum Radiator, here specially implemented on this LED to multiply heat extraction, not to mention the use of rare and precious minerals such as Graphene which, for its part, improves the overall Thermoelectric conductivity in an exceptional way.
Despite what one might think, the H1 Thallium LED hardly heats up at all compared to a standard halogen bulb. Also, there is no risk for your connectors or your wiring harness: we are still below the manufacturer's safety margins.
H1 LED Thallium: New High-Performance Can-Bus
The major advantage of the LED H1 Thallium bulb is its very high power. Usually, an LED is considered low consumption, but as far as the LED H1 Thallium is concerned, this is not really the case. In fact, it's quite the opposite, as the consumption is higher than the original. But this parameter gives it great anti-error capability. Thanks to this, problems related to low electrical consumption are mostly inhibited. After several tests on vehicles with complex electronics, the LED H1 Thallium proves to be one of the LED best suited for solving error problems like "burnt out bulbs," especially on Volkswagen, Audi, Skoda.
LED H1 Thallium: AGM Vision test bench
After several months of testing and numerous updates before its release, the H1 Thallium LED bulb has continuously increased its luminous performance, to now reach its peak at around 16 000 raw Lumens per bulb (theoretical Lumens without energy loss). To confirm the achieved performance, we carried out a validation test in real conditions in our internal laboratory using our calibrated IES radiospectrometer sphere. This test allows us to measure the actual Lumens with all constraints, that is to say: thermal, electrical, and mechanical. Nothing to do with raw Lumens, which are theoretical Lumens calculated.
- 1st H1 Thallium LED: 6790.30 actual Lumens AGM Vision measurement
- 2nd H1 Millenium 2 LED: 5765.70 actual Lumens AGM Vision measurement
- 3rd H1 Titanium XS LED: 3900.70 actual Lumens AGM Vision measurement
- Philips approved H7 LED: 1332.30 actual Lumens AGM Vision measurement