H1 SMART LED Bulb Kit - Car
LED H1 All in One! Compact, fanless cooling...
Satisfaction guaranteed!
LED H1 SMART AGM Vision: ambivalent and minimalist for foolproof efficiency
Designing LEDs means thinking about all cars, all enthusiasts, and all budgets. At AGM Vision, innovation is for everyone. The H1 SMART AGM Vision LED is a creation we are proud of and which is enjoying great success in our online store. We'll explain why!
LED H1 SMART: miniature technology accessible to all
When we say Smart at AGM Vision, it's SMART! The H1 Smart LED is miniaturized and incorporates an internal Can-Bus anti-error module, as well as all the electrical and electronic components that are usually on the outside, such as the various cables and external anti-error boxes. The power plug is not polarized and connects directly to the LED. We have developed the "all-in-one" concept to make installation easier, especially when space is limited and makes installing a standard LED difficult. The H1 Smart LED is thus accessible to all novices. In fact, assembly is done using a 360-degree smooth ring, and its 30 mm diameter allows it to be installed without any modifications.
High-tech technology for a sweet price
The price of the H1 SMART LED is that of a mid-range LED! The H1 Smart AGM Vision offers excellent efficiency/price ratio.
LED H1 SMART: fanless cooling
In terms of user comfort, we have adopted an aluminum fin system used in aviation, which allows for passive cooling without a fan! Thanks to its exclusive cooling system, this LED can be installed in any circumstance, even in some cases where it is in direct contact with its environment (headlight optics without a sealing cover). In the same configuration, there are other more powerful passive cooling LED models available, for example : LED H1 Ultra Slim and LED H1 Slim Evo.
LED H1 SMART: adaptation to all vehicles
Our SMART H1 LED can be used on all vehicles, but it is particularly recommended for off-road driving. In fact, it resists water, mud, dust and all types of splashes that come with off road driving: ATVs, enduro motorcycles, motocross, 4x4 as well as all professional equipment working in extreme conditions, such as construction machines, tractors, trucks, etc.
Thanks to its passive cooling system, the H1 Smart LED can be installed anywhere. It will not suffer any damage unlike a standard LED equipped with a fan, which can get clogged, seize up or experience other mechanical failures. It can easily be installed for standard use: low beams, high beams as well as front fog lights, where dirt is closest.
SMART LED AGM VISION ADVANTAGES:
CE approved
From 12 volts up to 60 volts
Power: 25 Watts and 4125 Lumens (per bulb)
Allows you to considerably increase the performance of your lighting.
100% silent.
Very neat anthracite grey finish.
Smooth ring at 360 degrees.
Size: 30 millimeters.
Resistant to dust, dirt, sand, etc.
AGM Vision Council:
Note: the Smart LED is not suitable for projector headlights, nor for headlight optics equipped with reflectors that are too grooved or too small. In this case, please opt for a LED H1 Titanium XS or Millenium.
To improve its Can-Bus function, if an OBD error appears after installing it, please use this Can-PRO H1 anti-error module which will solve all your problems.
Looking for more power? Discover our ventilated LED range: LED H1 Titanium XS and the extreme power of the LED Millenium AGM Vision!
Pay particular attention to H1 LED models
Before placing any order, please make sure that your original H1 halogen bulb is positioned vertically in your headlight optic, as shown in the attached photo. If yes, perfect: you will have no installation problems and no modifications to make to achieve optimal lighting.
If, on the other hand, you notice that your original halogen bulb is tilted in your headlight housing, as shown in the attached photo,
in this case, if you replace it with the H1 LED, it will end up blocked in a diagonal position in your headlight housing. As a result, the power and precision of the lighting will not be optimal. To remedy this positioning problem, it will be necessary to mill your headlight housing using a precision Dremel in order to be able to rotate the LED to the vertical position (installation reserved for professionals or experienced amateurs).