ANTI-FLASH-BUG MODULE H13 - Car
Module / filter, removes bugs and reduces light flashes.(Know that it is necessary to buy one module per LED bulb)
⚠️ Special attention : our module may not work properly and may not provide any result if your LEDs are not from the AGM Vision brand. Please contact us before your purchase to check compatibility.
Satisfaction guaranteed!
Comfort and safety
The module « Anti-Flash-Bug » OBD H13 is based on the latest technologies. Better than any other, this H13 digital filter module is the most effective for reducing flashes at startup (German car) as well as those while driving. Absolute weapon for « operating bugs », such as: LED bulbs that turn off after several minutes, or the high beam mode that does not work properly. Regarding the treatment and removal of OBD errors, this HIR2 module Anti-Flash-Bug does not use high resistors (adds only +/- 5W of consumption) and therefore cannot compensate for too low electrical consumption. If you are looking to eliminate an error caused by too low electrical consumption, please choose the Can-Pro H13 or Supreme HIR2 module instead.
The module Anti-Flash-Bug H13 works with a filter system controlled by a « Smart Program » coupled with capacitors and resistors, which allows it optimal control of errors as well as the stability of your vehicle's electronics, notably by acting on smoothing voltage and distribution of electrical load. A very safe anti-error module that creates no heating of wires and terminals nor any disturbance with your electrical system. In addition, it has a powerful next-generation anti-interference filter, which will allow you to listen to the radio without crackling in the speakers.
Innovative
The Anti-Flash-Bug H13 module introduces a brand new dual capacitor system with a total 20000 uf capacity, thus allowing to drastically reduce flashes, flickering and other blinking by 80% to 100% during the vehicle start-up phases after installing an LED bulb. This is particularly useful on German vehicles: BMW, MINI, VW, AUDI... equipped with a (Check control) monitoring system that checks the proper functioning of the bulbs when the vehicle is powered on. This test can last several seconds and is often very visible after installing LEDs, causing the appearance of light flashes. If you notice this issue, use this Anti-Flash-Bug H13 module.
Premium Finish
This module Anti-Flash-Bug H13 of 3rd generation has received all the attention, whether in terms of material selection or even insulation, which gives it exceptional quality, combined with an attractive design blending elegance and radicality. It will be the ideal box to enjoy your LED lighting in complete peace, without disturbance. A highly recommended anti-error module for the most modern cars.
Advantages of the Anti-Flash-Bug module:
• Plug & play installation, plug the module directly between your H13 LED bulb and the original H13 vehicle socket (compatible with other anti-error modules, such as the Can-Pro H13 module).
• Reduces by 80% to 100% the flashes, flickers, and shimmering that appear after installing LED bulbs, as well as during start-up phases, especially on German vehicles (BMW, Mini, VW, AUDI…).
• Restores normal operation of your lighting in most cases: when the high beam mode does not work properly, when only one out of two LEDs lights up just after installation or when an LED bulb turns off while driving.
• Eliminates error messages (very effective for errors related to operating bugs and electrical instability). Warning, this Anti-Flash-Bug module will not solve errors related to too low power consumption. In this case, please add a Can-PRO H13 module in addition to this one.
• Eliminates radio interference.
• Low heat emission: thanks to its 100% aluminum shell and its internal design, this Anti-Flash-Bug module heats up much less than a standard anti-error module.
• Extends the lifespan of your LED bulbs.