2 x SUPREME ERROR CANCELLER MODULES HIR2/H10
With the Suprême HIR2/H10 anti-error module, benefit from an all-in-one smart box: reduction of flashes and elimination of 96% of the vehicle's ODB errors.
Multifunction anti-error housing
The anti-error module HIR2/H10 Supreme is quite simply one of the best anti-error modules currently available. Resulting from the 4th generation, it corrects all the shortcomings of its predecessors (Can-Pro and Ultra). Indeed, this Supreme anti-error module HIR2/H10 brings together the best functions in a single unit. This "All in one" module removes 96% of OBD error lights thanks to an entirely new intelligent system that automatically regulates your power consumption to 55w (value corresponding to the consumption of your original bulb). Your comfort will not be neglected either! This anti-error module HIR2/H10 Supreme uses one of the most effective anti-flicker systems for LED bulbs (an initial and running flash reduction of between 80% and 100%). In its extreme version the Supreme module acts as a high-power relay which allows for a significant improvement in electrical connections in particular against overheating problems as well as all cuts and voltage drops or surges; not forgetting optimal insulation against all electrical interference. An ultra-safe module that will be a first-choice and highly recommended for all high-end cars: German cars (BMW MERCEDES VW AUDI…) as well as all vehicles equipped with multiplexing or complex embedded electronic systems. If you don't want to take risks choose this 100% safe unit. (Guaranteed risk-free for your electronic control units)
TO KNOW: The SUPRÊME Box has 2 installation modes.
INSTALLATION MODE N°1: (Mounting the box only without electrical harnesses)
With mode 1 : the anti-error module HIR2/H10 Supreme will behave like a classic anti-error box, comparable to its little brother, the anti-error module HIR2/H10 Ultra (adds +/- 5 Watts), but with slightly more efficiency for suppressing OBD errors. If you do not wish to spend too much time on the installation, you can start with this installation mode no.1 : it proves sufficient in the majority of cases.Be aware nevertheless that with installation mode no.1, the resistance emitted by the Supreme module HIR2/H10 may be slightly too low, which can induce a persistent OBD error. In this case, two solutions are available to you : add an additional module (example : a Can-PRO module HIR2/H10) and connect it (in series) in addition to your Supreme module. With this method, you will significantly increase your chances of removing your fault warning light. Another solution : use connection mode no.2.
INSTALLATION MODE No.2: (Assembly with wiring harness on battery)
With mode 2: the Supreme HIR2/H10 anti-error module will then be in extreme version. You will thus benefit from all the features and advantages offered by this unit, notably the activation of the intelligent automatic power adaptation system (allows to avoid 96% of OBD error lights). This system maintains the power between 50 watts and 55 watts in real time, corresponding to the exact consumption of your original bulb. To support LED bulbs, the Supreme module has a wide power range from 5 to 75 watts, allowing optimal adaptation, no matter the power of the chosen LED, whether it is very powerful, low-power or even with several additional Can Bus units. The Supreme module will always regulate to the same power value. (Now, thanks to the Supreme unit, no more hassle looking for the right anti-error module, because this one will always adapt perfectly to your installation.)
The Supreme unit will become your best ally for enjoying unbeatable reliability, allowing you to significantly multiply the lifespan of your LEDs, while ensuring optimal protection of your onboard electrical system (power unit, electrical supply, etc.). For this, the Supreme unit has an unprecedented and clever "two-stage" operation, composed of 2 perfectly isolated and distinct electrical circuits: a dedicated power circuit to guarantee you an excellent quality electrical supply, stable, without any disturbance nor even cuts, drops or surges in voltage, and finally a circuit dedicated only to electronic control dealing only with signals for OBD error detection.
ADVANTAGES of the SUPRÊME case:
• Plug&play installation, only with Installation mode No.1, connect the module directly between your LED bulb HIR2/H10 and the original HIR2/H10 vehicle socket (can be combined with other anti-error modules, such as the Can-Pro HIR2/H10 module).
• Extends the lifespan of your LED or Xenon kits
• Eliminates 96% of OBD error messages
• Eliminates radio interference
• Reduces by 80% to 100% the flashes, blinking and flickering that appear after installing LED bulbs, during start-up phases, especially on German vehicles (BMW, Mini, VW, Audi…)
- Ideal for those who want to install LEDs on a vehicle powered by alternating current (not equipped with a regulation device). Example: old vehicle, motorcycle, quad, scooter… The Supreme module makes it possible to restore an optimal and continuous power supply, without oscillation of voltage or current.
• Restores the normal operation of your lighting in most cases: when the high beam mode does not work properly, when only one LED out of two lights up right after installation, or when an LED bulb turns off while driving. It also corrects all the small electrical instabilities of LED bulbs during operation.
• Double protection against short circuits, helping to avoid all related risks (protection of vehicle components: sockets, wiring harnesses, electronic control units…)
• Effectively combats the risks of electrical failure (electronic control unit, windshield wiper, etc.) following the installation of LEDs (a problem very often linked to the addition of resistors that are too strong, creating overheating in electronic control units). With this Supreme box, in installation mode No.2, no longer worry about power consumption by looking for the right resistor or the right anti-error module to use. With the Supreme anti-error module, no incompatibility problem, because the power will be automatically adjusted to the ideal operating value of your original bulb.
• Please note: the Supreme anti-error module is also 100% compatible for a Xenon installation (connection to the ballast).