LED bulb HS1 – special for motorcycle & scooter

Name: HS1 LED bulb for motorcycle & scooter | AGM Vision
Brand: AGM Vision
Availability: InStock
Rating: 5 (4 reviews)

Replace the HS1 halogen bulb of your motorcycle or scooter with a high-brightness LED. The HS1 is a base exclusively dedicated to two-wheelers, similar to the H4, but limited to 35/35W. Our HS1 LEDs offer an intense white light with low/high beam management. France stock, shipping 24/48h.

4 result(s) for "HS1 – Motorcycle & scoote..."

3300 lumens 25 Watts

HS1 SMART LED Bulb

Ideal for off-road and extreme conditions, compact, fanless. Excellent LED allowing you to incr...

€31 25

In stock

(1)

3000 lumens 25 Watts

HS1 LP1 V2 LED bulb

HS1 LP1 LED bulb in a format similar to the original halogen bulb. 100% Plug&Play. Installation...

€19 95

In stock

(3)

1000 lumens 6 Watts

HS1 Dual Tech LED Bulb specific AC-DC - White 6000K

The HS1 Dual Tech LED bulb is specially designed for vehicles and small-displacement motorcycle...

€19 95

In stock

1000 lumens 6 Watts

HS1 Dual Tech specific AC-DC LED bulb - Yellow 3000K

The HS1 Dual Tech 3000K LED bulb is specially designed for vehicles and small-displacement moto...

€19 95

In stock

LED HS1 – The base dedicated to motorized two-wheelers

The HS1, specific to motorcycles and scooters

The HS1 bulb is a format exclusively reserved for two-wheelers. Visually close to the H4, the HS1 operates at 35/35 watts (versus 60/55W for the H4) and has the same P43t base. This reduced power is suited to the alternators of small- and mid-displacement motorcycles and scooters. The HS1 LED bulb transforms lighting with a pure white luminous flux, considerably higher than halogen.

Difference between HS1 and H4

The HS1 and the H4 share the same P43t base and are physically interchangeable. The difference lies in the filament power: 35/35W for the HS1, versus 60/55W for the H4. In practice, an HS1 LED consumes much less than both and works in both types of optics. The important thing is to check that your headlight is designed for a 35W beam and to adjust the height if necessary.

Why buy from AGM Vision

AGM Vision offers HS1 LEDs optimized for motorcycles and scooters, with a compact heat sink suited to narrow optics. Technical data sheets with luminous flux, dimensions, and compatibility. Stock in France, shipping within 24/48h, responsive customer service and payment in 3x/4x at no extra cost from 45 €.