HB3 9005 THALLIUM LED Bulb 85 WATTS, 16,000 LUMENS, WHITE 6500K - Motorcycle & Quad
HB3 LED, extreme power, wide and far lighting, rather recommended for competition.
The HB3 9005 Thallium LED has the maximum allowable power, without risk to your vehicle's electronics.
.jpg "AGM Vision Competition: LED HB3 9005 Thallium")
AGM Vision Competition: LED HB3 9005 Thallium
The HB3 Thallium LED could be summed up in a single word : EXTREME. Its name is related to a highly toxic poison : you will understand why later. The specifications for the HB3 Thallium LED bulb have not undergone any restriction as regards the deployment of luminous power. With such instructions, the use of this kind of LED is not to be put in everyone’s hands : the brightness is such that precision is, of course, more difficult to control, which is purely logical.
We recommend this LED mainly for low beams, but only if the headlight optics are projector lenses. It must not be used on reflector headlights, because its power is too high. On the other hand, it is ideal for high beams, where it can express its full potential, whether with reflector or projector headlights.
The HB3 Thallium LED bulb is the most powerful in our entire range, with 85 watts and 16 000 raw Lumens per bulb, i.e. 170 Watts and 32 000 raw Lumens for 2 bulbs. It stands far ahead on the podium of the most powerful LEDs, without having the obligation to change the cross-section of the power supply wires. Intended for enthusiasts of extreme light for competition, rally, not forgetting Off Road.
.jpg "HB3 9005 Approved LED Comparison vs HB3 9005 Thallium LED")
HB3 9005 Approved LED Comparison vs HB3 9005 Thallium LED
As you can see in the attached photo, the difference between an approved LED and a competition LED is more than obvious. We decided to carry out this test to show you just how important the contrast is between these two worlds. This is not meant to say that an approved HB3 9005 LED bulb does not provide good lighting, but simply to allow you to visually appreciate the power and the impressive size of the light spectrum of the HB3 Thallium LED bulb compared to an approved HB3 9005 LED bulb. Conversely, the latter perfectly respects the shape and size of the original spectrum; only its light intensity is higher than an original halogen bulb, as well as its color, which is whiter.
Test result carried out at a distance of 4 meters with a Peugeot 206 headlight unit:
High beam: 5300 LUX peak for the H7 Thallium LED
Low beam: 3200 LUX peak for the Approved H7 LED
.jpg "HB3 9005 LED Thallium: Incredible vision! Like broad daylight")
HB3 9005 LED Thallium: Incredible vision! Like broad daylight
The Thallium HB3 LED bulb features 6000K white lighting, ultra powerful and unmatched. Compared to a standard LED, such a light output was not even imaginable before, without resorting to the use of additional LED lighting, such as an LED light bar or strip. This Thallium HB3 9005 LED bulb is a real treat in the countryside or for those who live in mountainous regions.The advantage of the Thallium HB3 LED bulb lies mainly in its 85-watt power and the choice of the LED chip (wide hybrid spectrum exploited to its maximum). The combo of the two provides lighting without shadow zones: the slightest millimeter of asphalt will be filled with light. With such light intensity, your field of vision will be extra-wide, but also very far-reaching. Usually, with a classic LED, a trade-off is always observed: the light cannot be distributed everywhere, either far or wide, but not at a very good level in each case. The HB3 9005 Thallium LED also proves to be a very good ally for smoothing out existing lighting defects.
.jpg "HB3 9005 LED Thallium: Arsenal of the Best Technologies")
HB3 9005 LED Thallium: Arsenal of the Best Technologies
The HB3 LED Thallium bulb is truly designed like a race car and, of course, this one innovates with the best current technologies as well as the most high-end materials, essential for such a level of performance and flawless reliability.
We obviously find the Multi Tube Copper with Liquid Sodium system already known from the Millenium 2, with the addition of a high-capacity aluminum radiator, specially implemented here on this LED to multiply heat extraction, not to mention the use of rare and precious minerals such as graphene allowing, for its part, to improve all the thermoelectric conductivity in an exceptional way.
Despite what one might think, the HB3 9005 Thallium LED hardly heats up at all compared to a standard halogen bulb. Also, there is no risk to your connectors or your electrical wiring: we are still below the manufacturer safety margins.
.jpg "HB3 9005 LED Thallium: New high-performance Can-Bus")
HB3 9005 LED Thallium: New high-performance Can-Bus
The major advantage of the HB3 9005 Thallium LED bulb is its very high power. Usually, an LED is considered low-consumption, but regarding the HB3 Thallium LED, this is not really the case. It's even quite the opposite, because the consumption is higher than the original, but this parameter gives it a great anti-error capability. Thanks to this, error problems related to low power consumption are mostly inhibited. After several tests on vehicles with complex electronics, the HB3 Thallium LED has proven to be one of the LEDs best suited to solve error problems such as "burnt out bulbs", especially on Volkswagen, Audi, Skoda.
.jpg "LED HB3 9005 Thallium: AGM Vision Bench Test")
LED HB3 9005 Thallium: AGM Vision Bench Test
After several months of testing and numerous updates before its release, the HB3 Thallium LED bulb has continuously increased its luminous performance to now reach its peak around 16 000 Raw Lumens per bulb (theoretical Lumens without energy loss). To confirm the performance achieved, we carried out a validation test in real conditions in our internal laboratory using our calibrated IES radiospectrometer sphere. This test allows us to measure the actual Lumens with all the constraints, that is: thermal, electrical, and mechanical. Nothing to do with Raw Lumens which are theoretical Lumens calculated.
- 1st LED HB3 9005 Thallium: 6790.30 actual Lumens measured by AGM Vision
- 2nd LED HB3 9005 Millenium 2: 5765.70 actual Lumens measured by AGM Vision
- 3rd LED HB3 9005 Titanium XS: 3900.70 actual Lumens measured by AGM Vision
- Philips approved H7 LED: 1332.30 actual Lumens measured by AGM Vision