Discover our curved LED bars

A curved LED light bar follows the natural curvature of the vehicle’s roof, which offers a more aesthetic and aerodynamic installation. This shape reduces wind resistance and eliminates the whistling at high speed that a straight light bar can produce. In addition, the arc arrangement of the LEDs widens the effective lighting angle, reducing shadow areas on the sides. The result is more uniform and enveloping lighting, particularly appreciable in off-road driving.

Curved LED light bars are designed with a standard curvature radius matching the majority of SUVs, 4x4s and pick-ups on the market. They are installed on roof gutters or on roof rack crossbars using adjustable brackets. The curvature is suitable for standard-width vehicles (about 1.70 to 1.90 m). For narrower or wider vehicles, check the exact dimensions on the technical data sheet. The adjustable mounting brackets compensate for slight differences in curvature.

Installation requires side mounting brackets that attach to the ends of the bar and bolt to the gutters or to the roof bars. Drill the mounting locations or use universal clamping brackets. The power cable runs through the door seal or through a watertight cable gland drilled into the roof. Connect the circuit via a relay and a fuse of suitable rating (15A for 126W at 12V). A switch in the cabin allows activation. Finally, adjust the beam angle to avoid glare.

The curved LED light bars in the AGM Vision catalog offer 12 000 lumens with a power of 126W. This power is more than sufficient to light up an off-road track or a country road over several hundred meters. The combo beam combines central spot LEDs for long range and side flood LEDs for wide lighting. The 6000K color temperature produces a natural white light, which improves contrast and the perception of terrain.

Yes, curved LED light bars are IP67 certified, which guarantees total protection against dust and resistance to immersion in water up to 1 meter for 30 minutes. They can easily withstand rain, mud splashes, and high-pressure washing from a reasonable distance. The cast aluminum housing and silicone seals prevent any infiltration. Waterproof connectors ensure the reliability of the electrical circuit, even in the most humid conditions.

Yes, this is one of the main advantages of the curved format. By following the shape of the roof, the bar reduces the frontal surface exposed to the wind and creates less turbulence. The characteristic whistling of straight bars from 80-100 km/h is clearly reduced. Some models also incorporate an aerodynamic profile with an upper fairing that deflects the airflow. To further reduce noise, silicone deflectors can be added on the leading edge of the ramp.